Timur_Dolgikh
Member
Hello, guys. I need an advise about Kollmorgen Servostar S601.
The client changed an old amplifier with a new one, the same model, and I had to load parameters, but couldn't connect to it. But I can connect to the old one. Question is - is there some actions to do to get the new amplifier operational, like to set some switches or something like this, or it's just malfunctional?
I used Drive.exe program, Serial-to-USB converter and the cable with 2-3, 3-2, 5-5.
The client changed an old amplifier with a new one, the same model, and I had to load parameters, but couldn't connect to it. But I can connect to the old one. Question is - is there some actions to do to get the new amplifier operational, like to set some switches or something like this, or it's just malfunctional?
I used Drive.exe program, Serial-to-USB converter and the cable with 2-3, 3-2, 5-5.