PanelView 550 Cannot Load External Font Server

bugnot

Member
Join Date
Feb 2016
Location
everywhere
Posts
4
Hi guys

I upload the backup from a PV550 DH+ old terminal through RS232 printer port and a straight cable. No problems with the upload, I got the .PVA file.

When I tried to convert this to .PBA, the PanelBuilder32 showed up "Cannot Load External Font Server".

The existing PV550 has a memory card inserted.

The problem is: the existing PV550 is in a bad condition, we have another one in stock (exactly the same PV550)

1- If I download the .PVA file from the old PV550 to the new PV550, will it run without problems? (Even if I dont put the memory card on the new PV550)

2- Do I need to remove the memory card from the old PV550 to the new PV550?

3- Is there any way to get the external font and add it to my panelbuilder32 so I can open and modify the application?

Thanks in advance
 

Similar Topics

Hi all, Im having trouble transferring a program from one panelview 550 to an new one. I can insert a flash card into the old panelview and upload...
Replies
20
Views
308
Client has multiple spare Panelview 550 (2711-T5A10 L1 PV550 Touch Devicenet)...
Replies
5
Views
638
need instruction on how to download an existing program to the PV. I am very new to PLC's they came with the job so now sink or swim don't want to...
Replies
6
Views
868
Good afternoon I have a panelview 2711-k5a2 ser B Rev-C frn 1.07. Can this be up graded to Rev J frn 4.10-4.XX? Thanks
Replies
17
Views
3,359
Panelview 2711-K5A8. Customer has 6 of these in service connected to SLC 504’s. One has a bad backlight and I need a solution to replace it...
Replies
11
Views
2,206
Back
Top Bottom