Panelview 800 write a constant at startup

ianingram

Lifetime Supporting Member
Join Date
Apr 2002
Location
Newcastle
Posts
454
Hi All,

I am doing a demo project (or actually two projects) at the moment with a Panelview 800.

Does anybody know of a way that a Panelview 800 could write a constant value (or a bit)to the PLC to indicate which project is running on the Panelview 800.

The PLC is a Micrologix 1100

Thanks
 

Similar Topics

As the title says, I'm using CCW with a PV800 (and Micro850). I've made a scheduler in which a user can choose a month, day (1-31), hour (0-23)...
Replies
15
Views
454
Hello, So i managed to read the string coming from control logix and put a string display in PanelView 800. Now I am struggling to do the other...
Replies
1
Views
115
Good morning all, programming a Panelview 800, I have a maintained push button programmed on screen 1. I copied and pasted it to screen 2. Could...
Replies
2
Views
1,140
I'm trying to convert an old panelview 600 application to the 800 and I'd like to keep the current serial comms configuration instead of adding...
Replies
1
Views
563
Hi all, I had a setup with 2 Micrologix 1100 connected to a Panelview C300 over DH-485. I was mandated to upgrade the HMI, and proposed to...
Replies
5
Views
872
Back
Top Bottom