1769 CJC jumper compatible with 1756 card?

mylespetro

Member
Join Date
Dec 2015
Location
NS
Posts
740
Hey everyone,


Ran into a bit of a hiccup today, we (I) forgot to order the CJC kit for a 1756 ControlLogix thermocouple card, and we need some ASAP. We found a 1769 CompactLogix thermocouple card at our office on a bench setup that does have two CJC jumpers, would these work with the 1756 card, or are they incompatible? Definitely won't forget ordering the jumpers again o_O (I definitely will)


Thanks!
 
I doubt they are. CJC's are typically specific to the device they are made for (different resistance values at different temperatures). You could check and see what part number comes with each device and if they are the same then they probably would work but if they are different then it won't work (it will miss-calibrate your device).
 

Similar Topics

Anyone know a fix for this? 1769-IT6, 2 modules both have same problem. Setup for K tc, 1x engineering units data, degrees F, 60Hz filter...
Replies
16
Views
4,202
Does anybody know what they use for the Cold Junction Compensator on a 1769-L27ERM? From measuring it, it seems to be just a generic NTP...
Replies
0
Views
1,364
Hi Guys, I have a 1769-L24-QBFCB1 that has the OK light flashing on the embedded counter module. The manual states it is a resettable fault, but...
Replies
0
Views
6
Hello all, and thank you in advance for any assistance you may be able to provide! This is my first post, so if I need to reformat or change...
Replies
0
Views
14
We are trying to poll data coming from a PLC for remote monitoring we have the IP address of the PLC and the default port number and the path is...
Replies
25
Views
418
Back
Top Bottom