Vsd

ktmtragic

Member
Join Date
Jan 2013
Location
Sydney
Posts
92
I have a "Goodrive VSD that in the manual says press PRG/ESC to enter the parameter list. When I do this I am unable to access the P registers. I end up with the following options. D B L H E but no P can anyone help please?
Thanks
 
Is there any chance there is a parameter one must set to access the rest of the parameters?

I believe they are some old Siemens VFD drives that only allow access to part
of the parameter set - until I set one of them to the right vale then I can see
all the parameters.
Poet.
 
When you buy cheap Chinese junk at impossible prices over the internet, you get what you pay for. The fact that they offer no technical writers to translate their manuals properly and probably no technical support is how they can sell those drives so cheaply. Humans want money, smart humans command more money... they don’t pay any, which reflects in the prices they cal sell at.
 
Since we in the UK allowed our politicians to pass on untruths to get a Brexit, I have made it a bit of mission when I find others doing the same. Probably won't make me popular, but then I never did hang out with the 'cool kids'.

Here is the company website https://www.invt.com/
And here are manuals in English: https://www.invt.com/service/download/data-download.html

Another site with manuals: http://www.indusquip.co.za/product/invt-gd300-high-performance-ac-vfd-variable-speed-drive

Having a quick look there is a password that can be set.
 

Similar Topics

We have an existing VSD where a three phase circuit breaker feeds the drive, and two phases also tee off to a contactor, which is energised to...
Replies
12
Views
1,455
Hi all, We have an fr a740 inverter that is displaying a warning on the fr pu04 operator panel. Everything seem to be fine with the inverter but...
Replies
5
Views
1,378
Hi, New to this so please bear with me. I have this controlling a Netzsch Progressive cavity pump at 30Hz and the pumps motor is rated at 21A...
Replies
6
Views
3,137
Hello All, Not exactly a PLC question but more looking for advice on a PROFIBUS controlled ABB ACQ810 VSD. The drive is controlled over the...
Replies
1
Views
1,022
Hello All, Not exactly a PLC question but more looking for advice on a PROFIBUS controlled ABB ACQ810 VSD. The drive is controlled over the...
Replies
1
Views
1,097
Back
Top Bottom