lifetech
Member
Hi again
my latest crisis is this: one of the slc 505 processors on a network failed yesterday. I took a used processor (the only one we have) off our shelf and loaded it and now were back up and running... except the rs232 port on this processor does not work and there needs to be pv+ in this port on dh485.
Untill I can get a new 505 in, I would like to put the PV+ on e-net and communicate with the 505 on that platform.
My problem is that in rslinx enterprise, this processor does not show up in design or runtime, therefore I cannot direct my short cut to the required processor. I attempted this online and rs linx sees the entire network, and also the comms tab in explorer see the entire network.
How can I add this processor to the local and target positions so my shortcut points to it?
Thanks!
my latest crisis is this: one of the slc 505 processors on a network failed yesterday. I took a used processor (the only one we have) off our shelf and loaded it and now were back up and running... except the rs232 port on this processor does not work and there needs to be pv+ in this port on dh485.
Untill I can get a new 505 in, I would like to put the PV+ on e-net and communicate with the 505 on that platform.
My problem is that in rslinx enterprise, this processor does not show up in design or runtime, therefore I cannot direct my short cut to the required processor. I attempted this online and rs linx sees the entire network, and also the comms tab in explorer see the entire network.
How can I add this processor to the local and target positions so my shortcut points to it?
Thanks!