With RS5000 and a Clogix, I would like to know if i can work with same coils adresse on 2 different subroutine and just call one at the time?
I mean subroutines from the main program and calling one of the 2 with a no/nc contact to switch.
Will the ''not called'' routine can still affect the status of the coils output in it or the coils only respond to the called logic ?
It would be easy to test this but i don't have the hardware at the moment.
The purpose of doing it would be to live update a huge portion of a program with limited time to download in the plc. And then, being able to revert back to old logic quickly without having to shutdown again.
To make it even more fun, all of this would have to happen thru a remote connection.
thanks
I mean subroutines from the main program and calling one of the 2 with a no/nc contact to switch.
Will the ''not called'' routine can still affect the status of the coils output in it or the coils only respond to the called logic ?
It would be easy to test this but i don't have the hardware at the moment.
The purpose of doing it would be to live update a huge portion of a program with limited time to download in the plc. And then, being able to revert back to old logic quickly without having to shutdown again.
To make it even more fun, all of this would have to happen thru a remote connection.
thanks