Siemens PLC

Hello Guys, I have good working experience on Rockwell / Allenbradly softwares, like RS Logix 5000/500 and Factory Talkview, Now I want to start work on Siemens PLC system. I don't have any idea about Siemens product, I need your support to to learn Siemens PLC, I'm looking such literature where I will get introduction with Siemens softwares and information about Siemens emulator. I just want to start Siemens from very basic.

You did not say what platform of Siemens... just like Allen Bradley they have several families that use different software and hardware

Their newest is TIA Portal, here is some information

http://w3.siemens.com/mcms/programmable-logic-controller/en/system-overview/Pages/Default.aspx

The 1200 is a good one to learn with http://w3.siemens.com/mcms/programmable-logic-controller/en/basic-controller/Pages/Default.aspx

Software TIA http://www.industry.siemens.com/topics/global/en/tia-portal/hmi-sw-tia-portal/Pages/Default.aspx

Geniusintraining: Just consider me such student who never touched Siemens Automation, I'm trying to find Siemens with basic information, like what software uses for programming (Like RS Logix5000/500 in AB), what communication method is use (Like RS Linx in AB) and controller organizing tree in Siemens softwares. So, I'm looking such link where I can download Siemens manual to start from very basic.
Please give me some short briefing regarding my above question.

http://w3.siemens.com/mcms/automation/en/automation-systems/industrial-automation/Pages/Default.aspx

Click the link above then click on the left side the topic you want to learn about

• SIMATIC Industrial Automation Systems
• PLC
• I/O Systems
• Control Systems
• Software for SIMATIC Controllers
• Programming Devices

Take a look here:
http://w3.siemens.com/mcms/sce/en/advanced_training/training_material/Pages/Default.aspx

I use Siemens' Support page a lot.
https://support.industry.siemens.com/cs/

Start doing the basic: download and install TIA Portal and start a project. It contains STEP 7 to program controllers and WinCC to program HMI's.

Thank you all, by your great help I'm on the track now. I found my required info by you guys given links.