Hello everyone!
Having a hot standby with H5724M system , I am randomly getting the following errors on the standby PLC:
The error messages appear randomly, however they seem to get more frequent until the standby PLC goes offline and does not recover. This increase in errors sounds like networking problem especially on the network switch connecting PLC with RIO drop but I would love to hear your opinions as I am not able to fix the issue.
I would really appreciate any comments !
Also let me know if you need further information on my setup.
Thank you in advance
Best Regards
Having a hot standby with H5724M system , I am randomly getting the following errors on the standby PLC:
- Message : HSBY: Switch from Standby to Offline
Symbol : Offline command register request
16#32D6 , 13014 - Message : Switch from Offline to Standby
Symbol : Hot standby
16#32DA , 13018
- PSY3610M
- H5724M
- ETY4103 (connecting PLC rack with RIO drop through a Schneider electric network switch)
- ETY4103 (connecting PLC rack with local network through another network switch)
The error messages appear randomly, however they seem to get more frequent until the standby PLC goes offline and does not recover. This increase in errors sounds like networking problem especially on the network switch connecting PLC with RIO drop but I would love to hear your opinions as I am not able to fix the issue.
I would really appreciate any comments !
Also let me know if you need further information on my setup.
Thank you in advance
Best Regards