Yokogawa Software

maharshicool

Member
Join Date
Dec 2006
Location
Lagos
Posts
15
Hi All,

I'm currently working on Vulnerability signature of ICS software and i'm need of few Yokogawa software. The need is only setup file unlicensed. Once the vulnerability is scanned then not need of software. The need of software below.

Softwares Softwares Version
CENTUM CS 3000 R3.05.00 - R3.09.50
CENTUM CS 3000 Entry Class R3.05.00 - R3.09.50
CENTUM VP R4.01.00 - R6.03.10
CENTUM VP Entry Class R4.01.00 - R6.03.10
Exaopc R3.10.00 - R3.75.00
PRM R2.06.00 - R3.31.00
FAST/TOOLS R9.02.00 - R10.02.00
Vnet/IP Open Communication Driver patch software R10.01.08
CENTUM VP Entry Class R6.04.00
Exaopc R3.76.00
PRM R4.01.00
ASTPLANNER R15.01 and prior
iDefine for ProSafe-RS R1.16.3 and prior
STARDOM: VDS R7.50 and prior
FCN/FCJ Simulator R4.20 and prior
TriFellows 5.04 and prior
ASTPLANNER R15.02.01
iDefine for ProSafe-RS R1.16.4
STARDOM: VDS R8.10
FCN/FCJ Simulator NA
TriFellows V 5.1
CENTUM CS 1000 all versions
CENTUM CS 3000 versions R3.09.50 and prior
CENTUM CS 3000 Small versions R3.09.50 and prior
CENTUM VP versions R6.03.10 and prior
CENTUM VP Small versions R6.03.10 and prior
CENTUM VP Basic versions R6.03.10 and prior
Exaopc versions R3.75.00 and prior
CENTUM VP,small,Basic R5.04.B2 or R6.04.00
Exaopc versions R3.75.00
CENTUM CS 1000 R3.08.70 or earlier
CENTUM CS 3000 R3.09.50 or earlier
CENTUM CS 3000 Entry R3.09.50 or earlier
CENTUM VP R5.04.20 or earlier
CENTUM VP Entry R5.04.20 or earlier
Exaopc R3.72.00 or earlier
Exaquantum R2.85.00 or earlier
Exaquantum/Batch R2.50.30 or earlier
Exapilot R3.96.10 or earlier
Exaplog R3.40.00 or earlier
Exasmoc R4.03.20 or earlier
Exarqe R4.03.20 or earlier
Field Wireless Device OPC Server R2.01.02 or earlier
PRM R3.12.00 or earlier
STARDOM VDS R7.30.01 or earlier
STARDOM OPC Server for Windows R3.40 or earlier
FAST/TOOLS R10.01 or earlier
FieldMate R1.01 or R1.02
FAST/TOOLS Version R9.01
FAST/TOOLS Version R9.05 SP1
FAST/TOOLS Version R9.05 SP2
FAST/TOOLS Version R10.01
CENTUM series with the Batch Management Packages installed NA
CENTUM CS 3000 Entry Class R3.09.50 or earlier
CENTUM VP R4.03.00 or earlier, R5.04.00 or earlier
CENTUM VP Entry Class R4.03.00 or earlier, R5.04.00 or earlier
Exaopc R3.72.10 or earlier
CENTUM CS 1000 all revisions
CENTUM VP R5.03.20 or earlier
CENTUM VP Entry Class R5.03.20 or earlier
Exaopc R3.72.00 or earlier
CENTUM CS 3000 R3.09.79
CENTUM VP R4.03.56
CENTUM VP Entry Class R5.03.51
Exaopc R3.72.03
CENTUM CS 1000 all revisions
CENTUM VP R5.03.00 and earlier
CENTUM VP Entry Class R5.03.00 and earlier
Exaopc R3.71.02 and earlier
Exapilot R3.96.00 and earlier
Exaplog R3.40.00 and earlier
Exaquantum R2.02.50 to R2.80.00
Exasmoc R4.03.20 and earlier
Exarqe R4.03.20 and earlier
AAASuite R1.20.13 and earlier
PRM R3.11.20 and earlier
STARDOM FCN/FCJ OPC Server for Windows R3.40.01 and earlier
Field Wireless Device OPC Server R2.01.01 and earlier
DAQOPC R3.01 and earlier
FieldMate R1.03 and earlier
EJXMVTool R1.02.00 to R1.02.02
RPO Production Supervisor VP R1.03.00 and earlier
CENTUM Long-term Trend Historian all versions
CENTUM Event Viewer Package all versions
CENTUM CS 3000 R3.09.73
CENTUM CS 3000 R3.09.75


Thanks for your support.

M
 

Similar Topics

Need yokogawa programming software for F3SP28-3S cpu..Plz share
Replies
1
Views
2,151
can i send and recieve data using my yokogawa UT35A controller with my siemens s7 1200 plc using profinet communication without using gsd file
Replies
1
Views
378
I need modbus communication tool for Yokogawa Rotamass Flow meter? can any one help me.
Replies
1
Views
978
Hi, i'm working with a differential pressure transmitter yokogawa EJA130E and have problems to connect it to a Schneider analog module TM3AI4...
Replies
2
Views
2,053
we have Fast/Tools at Control room to monitoring oil wells (RTU STARDOM) the Media Communication was CDMA Modem , Now we want to use the Wi-Fi...
Replies
0
Views
1,092
Back
Top Bottom