Steve Bailey
Lifetime Supporting Member + Moderator
A client has an EA7-T8C that is on its last legs. Will the EA9-T8CL install in the same panel cutout or will they need make modifications?
C-More EA7 to EA9
- Thread starter Steve Bailey
- Start date
Bit_Bucket_07
Member
This link might have some useful information: https://www.automationdirect.com/videos/video?videoToPlay=MEhlU0iBzxg
julileach
Member
Wow, thank you so very much for your amazingly detailed reply!
Similar Topics
Our C-more hmi screen went dark at one point. After power cycling, the screen shows ""no system found in the panel," and the LED status in the...
Has any one connected the Cmore panel to an Omron NJ PLC if so how?
I have been reading up on the FINS communication protocol, Seems a bit fuzzy...
I have an Automation Direct EA7 that I need to get the program out of to install in an identical terminal. Old unit powers up but serial port is...
Hope to get some input and suggestions from anyone who has had a similar project.
Need to control (very low level) 7 different Altivar 61...
I understand how the system works:
EA7 (Cmore) <--RS232--> DL260 (PLC) <--Ethernet--> LookoutDirect 4
but I have no idea if its possible...