Pejs Member P Join Date Oct 2020 Location Jylland Posts 2 Oct 28, 2020 #1 Hi Can somone help me I have siemens 1215 cpu danfoss fc 302 over profinet How to make the plc code for this Thanx
Hi Can somone help me I have siemens 1215 cpu danfoss fc 302 over profinet How to make the plc code for this Thanx
PLC Member P Join Date Sep 2002 Location NC Posts 311 Oct 28, 2020 #2 Have you seen this? https://www.youtube.com/watch?v=AGKN87QQK0Q http://files.danfoss.com/download/Drives/doc_MG90U102.pdf Last edited: Oct 28, 2020
Have you seen this? https://www.youtube.com/watch?v=AGKN87QQK0Q http://files.danfoss.com/download/Drives/doc_MG90U102.pdf
Pejs Member OP P Join Date Oct 2020 Location Jylland Posts 2 Oct 28, 2020 #3 Yess but in new in plc ☺ I dont understand how to start drive with plc code Can i move 1 signal to bit 00 in danfoss
Yess but in new in plc ☺ I dont understand how to start drive with plc code Can i move 1 signal to bit 00 in danfoss
L D[AR2P#0.0] Lifetime Supporting Member L Join Date Nov 2006 Location UK Posts 6,693 Oct 28, 2020 #4 Contact Danfoss technical support for assistance.
VictorBit Member V Join Date Sep 2012 Location Sweden Posts 103 Nov 1, 2020 #5 Quick question, Do the Danfoss drive speak Profidrive?
JRW Member Join Date Jun 2002 Location South Carolina Posts 2,301 Nov 1, 2020 #6 According to their manual - yes Technically the SinaSpeed block should work too Last edited: Nov 1, 2020
VictorBit Member V Join Date Sep 2012 Location Sweden Posts 103 Nov 1, 2020 #7 SINA will work but for more control setup the axis as a TO object and run it with PLCOpen standard code
SINA will work but for more control setup the axis as a TO object and run it with PLCOpen standard code
JRW Member Join Date Jun 2002 Location South Carolina Posts 2,301 Nov 1, 2020 #8 I use TOs for position control. I’m not a fan of using TOs for speed control Too much overhead for me
I use TOs for position control. I’m not a fan of using TOs for speed control Too much overhead for me