PF4 Modbus Comms Cable

robw53

Member
Join Date
Nov 2009
Location
south yorks
Posts
515
i am looking to wire up my 5 PF4's on my home test rig on modbus i have the RJ45 plugs from AB and want to know what type of cable to use, i have had a look and crnt find much info, i have looked through the RS book and think maybe the belden 9463?

anyone any advice
 

Similar Topics

Hi. I have been tasked to update a plc project for my work. Currently, the project is controllogix platform and controlling several drives. The...
Replies
2
Views
1,642
I was wondering if anyone could walk me through how to properly connect a 480v 3phase PF4 to 110v single phase. I am doing some final testing to...
Replies
7
Views
2,665
Hello, I need to access the bits from the fire system control panel through RS-485. So, I used Read Var block to read from the panel...
Replies
0
Views
27
I am having a problem communicating my PLC with Drive via Modbus connection. I start by opening the port and there is no problem, but then when I...
Replies
5
Views
39
Does anyone have an example project of the cm ptp ET200 SP HA with 410-5H DCS (PCs7 9.1 SP1) for MODBUS MASTER/SLAVE communication ?
Replies
2
Views
68
Back
Top Bottom