You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
Thread Tools Display Modes
Unread December 2nd, 2019, 11:26 PM   #1
afeefabdussamed
Member
Saudi Arabia

afeefabdussamed is offline
 
Join Date: Sep 2016
Location: Jeddah
Posts: 22
Connected Components Work Bench Micro 800 PLC Modbus Mapping

Dear all,

In CCW modbus Adress mapping where each adress is configured in modbus mapping option.For example I will be mapping some memory bit or Input Bool signals to 100001 and I am able to read the data from this adress starting from 100001.

Now my issue is I need to write data to Micro 870 through modbus.So for writing bool to Micro 870 which adress should be used?Is it like similiar to reading adress starting from 100001?

Normally in siemens I used to configure holding registers starting from 40001 but here in this I am not able to configure adress from 40001 as it is for word and I cannot segregate to byte.
  Reply With Quote
Unread December 3rd, 2019, 09:30 AM   #2
damica1
Member
United States

damica1 is offline
 
Join Date: Aug 2015
Location: Illinois
Posts: 725
Modbus "Function Codes" will determine what address range you will be (Reading/Writing) to.

CCW has several function blocks that can deal with "Expanding/Merging" bits into words or separating word value into bits.

However, you may have to download them(The function blocks) from their support web site.
__________________
David M. Camp

Unlocking the power of IOT in Oil & Gas!
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
MPI comunication Manuel Raposo LIVE PLC Questions And Answers 22 July 16th, 2007 07:24 AM
plz help modicon micro plc and the error lamp is always flashing!!!! anyaddress LIVE PLC Questions And Answers 5 November 15th, 2005 12:39 PM
modicon micro plc comm port smithmarc LIVE PLC Questions And Answers 0 June 23rd, 2005 12:45 AM
AB PLC, MODEM , MODBUS Connectivity gautham LIVE PLC Questions And Answers 8 April 25th, 2005 04:56 PM
Problem with Ge Fanuc micro plc bangob LIVE PLC Questions And Answers 4 October 28th, 2004 12:43 PM


All times are GMT -5. The time now is 05:43 PM.


.