You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old December 18th, 2003, 11:13 PM   #1
Rmiller
Member
United States

Rmiller is offline
 
Join Date: Dec 2002
Location: Vancouver, Washington
Posts: 25
TransNET 900's comm problem

Hope someone can shed some light on this.

We have installed 21 rtu's (AD 06's) and are communicating fine using Transnet 900 radios but when adding any additional rtu's the data does not come thru but the first 21 still operate fine.

I have switched sites and equip around and rearranged addresses in the master plc but it appears that the problem is with the number of rtu's. The rtu's and their radio's are set at 38400 modbus.
Could this baud rate setting between the rtu and it's radio be more than the radio to radio communication can handle?

Maybe lowering the baud rate to l9200 would help?
  Reply With Quote
Old January 2nd, 2004, 01:47 AM   #2
Rmiller
Member
United States

Rmiller is offline
 
Join Date: Dec 2002
Location: Vancouver, Washington
Posts: 25
Losing hair rapidly

Does anyone have or know of somebody that has more than 22 AD06 slaves communicating to an AD260, AD250 or AD06 master using a radio network or even just hard wired together?

Everything works just fine up to 22 slaves and then I cannot get any additional slaves to communicate.

The master 260's slave addressing will work using hex or dec up to F (15) but after this only dec will work.
Has anyone had a similier experience with this or if getting more than 22 slaves to work how were they addressed in the master?
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
Micrologix 1500 and USB Port Comm problem sandymax LIVE PLC Questions And Answers 3 February 8th, 2005 08:29 AM
Siemens HMI TP070 Comm Problem ltrail LIVE PLC Questions And Answers 6 February 28th, 2004 07:11 PM
I/O Comm. problem btw PLC & HMI WFox LIVE PLC Questions And Answers 7 December 31st, 2003 02:09 PM
Networking with transnet 900's and AD plc's Rmiller LIVE PLC Questions And Answers 2 October 23rd, 2003 01:15 AM
PV 1400E Comm. Problem Dave Williams LIVE PLC Questions And Answers 2 September 23rd, 2002 07:28 PM


All times are GMT -5. The time now is 10:49 PM.


.