QuickPanel View DF1 driver error

I am trying to hook up a GE QuickPanel View to an Allen Bradley MicroLogix 1000 via serial. Once I load the runtime into the View I get the following error message on the View:
DF!- 32 bit driver (DSV00100) encountered an error. Description: DF1 Module for allen Bradley driver. The driver uses DDK NextGen Tree Version 3.00.0.057, Feb 15, 2000

Driver log file:

2014/10/06 09:19:37 --> Cannot read the SLC I/O configuration table.
2014/10/06 09:19:37 --> Slot (1) is not found (Point (I1:1/3)). Point is discarded
2014/10/06 09:19:37 --> Error Parsing (I1:1/3)
2014/10/06 09:19:37 --> Slot (0) is not found (Point (O0:0/0)). Point is discarded
2014/10/06 09:19:37 --> Error Parsing (O0:0/0)
2014/10/06 09:19:37 --> Slot (0) is not found (Point (O0:0/1)). Point is discarded
2014/10/06 09:19:37 --> Error Parsing (O0:0/1)
2014/10/06 09:19:37 --> Slot (0) is not found (Point (O0:0/10)). Point is discarded
2014/10/06 09:19:37 --> Error Parsing (O0:0/10)
2014/10/06 09:19:37 --> Slot (0) is not found (Point (O0:0/2)). Point is discarded
2014/10/06 09:19:37 --> Error Parsing (O0:0/2)
2014/10/06 09:19:37 --> Slot (0) is not found (Point (O0:0/4)). Point is discarded
2014/10/06 09:19:37 --> Error Parsing (O0:0/4)
2014/10/06 09:19:37 --> Slot (0) is not found (Point (O0:0/5)). Point is discarded
2014/10/06 09:19:37 --> Error Parsing (O0:0/5)
2014/10/06 09:19:37 --> Slot (0) is not found (Point (O0:0/6)). Point is discarded
2014/10/06 09:19:37 --> Error Parsing (O0:0/1)
2014/10/06 09:19:37 --> Slot (0) is not found (Point (O0:0/7)). Point is discarded
2014/10/06 09:19:37 --> Error Parsing (O0:0/7)
2014/10/06 09:19:37 --> Slot (0) is not found (Point (O0:0/8)). Point is discarded
2014/10/06 09:19:37 --> Error Parsing (O0:0/8)
2014/10/06 09:19:37 --> Slot (0) is not found (Point (O0:0/9)). Point is discarded
2014/10/06 09:19:37 --> Error Parsing (O0:0/9)



Any ideas????

I suggest that you update the Driver.
First, you should verify that your version of PME is up-to-date.
Linked here: PME Update Links
What version of Proficy ME are you using, it will dictate the driver's version. PME 8.50 is current. Some of the older versions had "issues" with that driver.

PME version 7.0 SIM 21
I will try and download 8.5 but I am not a global care customer.... yet.