Fritz_frederix
Member
Hi Folks,
At this moment I'm comparing Wonderware Intouch with Siemens WinCC.
I'm building a small project, in this project I collect data out of
an Siemens S7-300 PLC and I use those two for visualisation I also transfer this data into a SQLServer. Has any one worked with SQL instruction in WinCC, with Intouch it is very simple? I'm also looking for a free WinCC manual.
Best regards Rudi
At this moment I'm comparing Wonderware Intouch with Siemens WinCC.
I'm building a small project, in this project I collect data out of
an Siemens S7-300 PLC and I use those two for visualisation I also transfer this data into a SQLServer. Has any one worked with SQL instruction in WinCC, with Intouch it is very simple? I'm also looking for a free WinCC manual.
Best regards Rudi