Schneider Twido to Magelis comms

We're a second hand machinery merchant. We've just had a machine arrive that has a Schneider Twido TWDLCAA24DRF PLC and a Magelis XBT-R411 HMI.
The cable from the HMI to the PLC ends in a 25-pin D connector at the PLC end and the PLC has an 8-pin mini DIN connector, so it seems that we're missing a D25 to 8-pin mini DIN adapter cable, of some sort. Does anyone know the part number of this adapter cable or could anyone provide the pinout for the two ends?

is a 2.5M one okay? XBTZ968

Absolutely! Thank you very much.

Pinout are documented here at PDF.



https://www.se.com/es/es/faqs/FA283031/


For info, Port1 is RS485 port, and by default it is on programming mode, even if port is configured on program side.
(Unitelway I think)
http://www.plctalk.net/qanda/showthread.php?t=69104&page=2





Port1 can selected for modbus communication if Minidin8 pin7 (PDT) is connected to 0VDC.


As original cable connects pin 7 to panel D25, then panel can tell to PLC which protocol is wanted.
Other alternatives are XBT-Z9680 (Angled D25 2,5m) and XBT-Z9681 (5m).

Thank you, Lare!