Allen Bradley Stratix SFP
- Thread starter msut4199
- Start date
TWS
Member
I was told by Rockwell that only AB SPF transceivers will work in Stratix switches.
Stratix 5700 switches are rated to 140F.
Use a heat exchanger or thermoelectric (Peltier) cooler.
Stratix 5700 switches are rated to 140F.
Use a heat exchanger or thermoelectric (Peltier) cooler.
Ken Moore
Lifetime Supporting Member
If you need high temp rated switches/gear. SEL is the way to go.
Rated to 185F.
https://selinc.com/products/2730m/
Rated to 185F.
https://selinc.com/products/2730m/
TWS
Member
Quote:"If you need high temp rated switches/gear. SEL is the way to go"
+++1
+++1
Similar Topics
Hi friends,
I need to check a process, so, I need to connect with some instruments through the switch stratix 1783 Allen Bradley. The instruments...
Hello All.
I am currently working on a project where the client has specified that we cannot use Allen Bradley materials. As a result I need to...
Hi, I have a ControlLogix system with 1756-IF16 analogue inputs. I can't scale the inputs at the card as there is a requirement to facilitate...
Dear community,
I am trying to find a tool for Allen-Bradley PLCs similar to SiVArch for Siemens PLCs to automatically generate faceplates and...
Hi everyone, new to forum. Since very long time i having issue with 1734-AENT module, after some period of time its keep stuck in error (simmilar...