Papplebeast
Member
I'm trying to set up a MSG path between a CLX processor on ControlNet to a PLC-5 processor on DH+ and I cannot figure this out. The first attached image is a photo of RSLinx with the source (BLUE) and destination (RED) highlighted. The most recent path I've attempted is in the second attached image. The CNB card in the CLX rack is in slot 3, so I've started the path with 1, 3 and it ends with a 6 with DH+ channel and node set properly.
Any help I can get on this would be greatly appreciated.
Any help I can get on this would be greatly appreciated.