How to connect FATEK FBs-60MA with Delta Dop series

Ashraf33

Member
A
Join Date
Apr 2021
Location
Karachi
Posts
2
I tried connection as shown in the picture
but receiving error " communication error F. ... Controller station no. Error"

IMG_20210417_113709.jpg IMG_20210417_113727.jpg
 

Similar Topics

K
Configuring Stratix 5400 to connect to a Stratix 5700
Greetings, I had an issue with a RIO rack 2 and IFM I/O Link dropping on my network. I would loose connection for a second or 2 then they would...
Replies
2
Views
52
KFerrese
K
Suhail
help me out to connect lenze i700 to PC
Hi friends, i need a help to know the procedure and steps to connect Lenze i700 to PC for parameterize. i tried with lenze easy-starter using LAN...
Replies
0
Views
35
Suhail
Suhail
Z
SCADA Pack RTU 474, IO card (5606) Not responding in Remote Connect
Hi, We have been facing a issue with SCADAPack 474. Configuration is like below. RTU 474 + 6103 PS + 5606 IO Mix Module + 5414 DI Module Only...
Replies
0
Views
72
Zubairjaved786
Z
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
12
Views
357
JesperMP
JesperMP
C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
123
Chris3EC
C
Back
Top Bottom