Mitsubishi Q00UJCPU communicate with HMI through RS232C

CKLiang

Member
Join Date
Dec 2018
Location
Selangor
Posts
1
Hi, is that anyone know the pin layout for the communication cable from Mitsubishi Q00UJCPU (6 pin mini) to any Schneider HMIGXU (D sub 9) through RS232c (because the PLC is use RS232C)? because i ady try many way of connection, but still cannot. attachment image is three way i had try, but not sure is that anyone can work or not.

WhatsApp Image 2018-12-23 at 10.18.50 AM.jpeg WhatsApp Image 2018-12-22 at 11.04.34 AM.jpeg WhatsApp Image 2018-12-22 at 12.47.45 AM.jpeg
 

Similar Topics

I'm been deciphering a program for a press here. I've gotten most of it deciphered using the manual to understand the instructions (first mitsu...
Replies
6
Views
48
hi all i am new here i have a mitsubishi smart touch hmi i.e ms-60t-pe but i cannot find a software to edit and download a program in it any help...
Replies
3
Views
97
I have Toyopuc PLC PC10G-CPU and some communication modules of it. With this modules I'm able to connect with Ethernet, Ethernet/IP, FLnet, FRMT...
Replies
0
Views
56
In this sample programming, what does U4 mean? Any assistance would be greatly appreciated.
Replies
8
Views
172
Hi, I have a project with a R04CPU, RD77GF16 and a RJ71PN92 modules. The cell is given to me to change the program since the previous integrator...
Replies
2
Views
93
Back
Top Bottom