SEW Servo Movidrive mdx60b/61b

Moustafa Elsherief · Feb 4, 2019

Hello

I have servo drive SEW model Movidrive mdx60b/61b
I want to upload/download its backup

Please need your help to know which software used to do this?

Maxkling · Feb 4, 2019

I believe it’s MoviTools or Motion Studio. They are both free on their website.

lanester · Feb 4, 2019

You may also need SEW's USB11A

Moustafa Elsherief · Feb 4, 2019

Maxkling said:
I believe it’s MoviTools or Motion Studio. They are both free on their website.

Thank you for your reply.... Could you please advice which communication cable can be used?

lanester · Feb 4, 2019

The USB11A is the interface. It should come with the required RJ11 cable. and a USB cable to connect to you PC, such as the one shown here https://www.radwell.co.uk/Shop/SEW ...MIjrfooJ2i4AIVmOF3Ch0ZRgCmEAQYASABEgJrzvD_BwE
You should be able to purchase from SEW direct.

Jeev · Feb 5, 2019

If your drive has an Ethernet interface (For example DFE33B), you can do it over the network.

hagos · Feb 6, 2019

Also if your drives are connected to a Profibus net work you can use your PC Adapter or your CP5511 or CP5512.

The SEW DP interface board manual describes that very well.

Regards

passwordg · Feb 6, 2019

This one:
http://download.sew-eurodrive.com/download/soft/SEW_Software_MOVITOOLS-V6.3.0.8.zip

Ethernet works best.

SEW Servo Movidrive mdx60b/61b

Moustafa Elsherief

Member

Maxkling

Member

lanester

Member

Moustafa Elsherief

Member

lanester

Member

Jeev

Member

hagos

Member

passwordg

Member

Similar Topics