Changing PLCs - PLCS.net

arthur.hauer · January 12th, 2018, 05:50 AM

Hello, folks!
FOA, I'm not a native english speaker, so bear with me...

I've recently been asked to change the PLC controlling a fiber painting machine. The problem is I've never done this before... That being said, I need your help to assure I won't screw up!

Both PLCs are Siemens:

Old: CPU 314 IFM (6ES7 350-5AE02-0AB0)

New: CPU 314C-2DP (6ES7 314-6CH04-0AB0)

The rack currently has the following modules:

FM 350 Counter (6ES7 350-1AH01-0AE0)
DI32xDC24V (6ES7 321-1BL00-0AA0)
DO16xRelais (6ES7 322-1HH00-0AA0)
DO8xRelais (6ES7 322-1HF00-0AA0)
A04x12bit (6ES7 332-5HD01-0AB0)
AO4x12bit (6ES7 332-5HD01-0AB0)
AI2x12bit (6ES7 331-7KB01-0AB0)

A CP 343-1 (6GK7 343-1EX30-0XE0) will be added.

I know the CPU 314IFM has special integrated counter inputs (used in the program), and so does the CPU 314C-2DP, but they are configured and used differently...

What should I be careful with? What's the standard procedure (if there's one)? I've already configured the hardware to address the inputs and outputs like the old PLC did, but something tells me that's not the whole story

gclshortt · January 12th, 2018, 10:17 AM

https://support.industry.siemens.com...dti=0&lc=en-WW

S7-300 Upgrade Check Tool - Link above.

This may be of assistance.
Regards,

arthur.hauer · January 12th, 2018, 11:52 AM

This tool compares SFCs in both CPUs, doesn't it?
Besides, I tried downloading it... Couldn't use it in my machine because it won't detect (and believe me, I tried a lot) the installed Step 7.

January 12th, 2018, 05:50 AM	#1
arthur.hauer Member Join Date: Nov 2016 Location: Paraná Posts: 25	Changing PLCs Hello, folks! FOA, I'm not a native english speaker, so bear with me... I've recently been asked to change the PLC controlling a fiber painting machine. The problem is I've never done this before... That being said, I need your help to assure I won't screw up! Both PLCs are Siemens: Old: CPU 314 IFM (6ES7 350-5AE02-0AB0) New: CPU 314C-2DP (6ES7 314-6CH04-0AB0) The rack currently has the following modules: FM 350 Counter (6ES7 350-1AH01-0AE0) DI32xDC24V (6ES7 321-1BL00-0AA0) DO16xRelais (6ES7 322-1HH00-0AA0) DO8xRelais (6ES7 322-1HF00-0AA0) A04x12bit (6ES7 332-5HD01-0AB0) AO4x12bit (6ES7 332-5HD01-0AB0) AI2x12bit (6ES7 331-7KB01-0AB0) A CP 343-1 (6GK7 343-1EX30-0XE0) will be added. I know the CPU 314IFM has special integrated counter inputs (used in the program), and so does the CPU 314C-2DP, but they are configured and used differently... What should I be careful with? What's the standard procedure (if there's one)? I've already configured the hardware to address the inputs and outputs like the old PLC did, but something tells me that's not the whole story

January 12th, 2018, 10:17 AM	#2
gclshortt Member Join Date: Dec 2014 Location: Cobourg Posts: 2,368	https://support.industry.siemens.com...dti=0&lc=en-WW S7-300 Upgrade Check Tool - Link above. This may be of assistance. Regards, __________________ Garry http://www.accautomation.ca Connect with us on Facebook: facebook.com/accautomation/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Siemens and other Western PLCs vs. Japanese PLCs	Andreik	LIVE PLC Questions And Answers	9	April 2nd, 2009 11:31 AM
protection againt changing mod of Siemens PLCs	farhad_i	LIVE PLC Questions And Answers	0	April 20th, 2008 11:35 PM
Learning to program PLCs	Cannery	LIVE PLC Questions And Answers	32	October 17th, 2007 09:13 AM
Automation Direct PLC's Opinions	Duwop	LIVE PLC Questions And Answers	44	October 11th, 2007 08:35 AM
PLC's on space shuttle	Jiri Toman	LIVE PLC Questions And Answers	14	May 21st, 2005 03:55 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

January 12th, 2018, 11:52 AM	#3
arthur.hauer Member Join Date: Nov 2016 Location: Paraná Posts: 25	This tool compares SFCs in both CPUs, doesn't it? Besides, I tried downloading it... Couldn't use it in my machine because it won't detect (and believe me, I tried a lot) the installed Step 7.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)