question about Simocode address

angi

Member
A
Join Date
Jan 2010
Location
us
Posts
361
Hi guys

I am working on a system with controllogix, prosoft MVI56 profibus module, and Siemense MCC (MM440 VFDs and Simocode Pro motor controllers),I use prosoft PCB to configure the system, for example, one MM440 which address as 3, one Simocode which address as 4. my question is how to physically set the address for MM440 and Simocode in order to match their address in PCB (3 and 4)? I do not have the software Simocode ES.

thanks
 

Similar Topics

P
Hello! I have a question about HMI 2711R
I have an HMI 2711R - T4T Series B, and I want to know which PLCs, besides Micro 820, can communicate with it.
Replies
2
Views
53
plc_siamens
P
J
PLC SIMATIC S7 1200 / KOP/SCL question
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Replies
2
Views
59
jimix
J
T
Rockwell Structure text Question
I'm working with a project that contains some routines in ST but mostly in ladder. Am I correct in assuming this 'rung': DB1001DO._01AV55_OPEN :=...
Replies
4
Views
95
toddp65
T
jimtech67
RS Logix BackUp silly question
Is there a way to reset the count on the RS Logix BackUp?? XXXXX PROGRAM IN PROGRESS_BAK445.RSS XXXXX PROGRAM IN PROGRESS_BAK446.RSS XXXXX...
Replies
8
Views
247
joseph_e2
J
B
can you run studio 5000 on an external drive? question on storage.
I have a few questions about Studio5000. 1. Why is my RA folder so big? its well over 100 GB. 2. How do you delete versions or extra files...
Replies
3
Views
270
robertmee
R
Back
Top Bottom