new to PLC subject, and dont know where to start

yeksm

Guest
Y
hi there,,

Anyone can give me advise where to start PlC programming, or may be start from whic brand and software,, actually I learned PLC in my school long aga, that time we using OMRON, but i almost forget it,,
Hope anyopne can help me show the perfect for starting PLC carrer..

Thanks

TOMMY
 

Similar Topics

We have two PLCs both are Mitsubishi-FX2N, and we want them to communicate to Weintek HMI MT8100ie. MT8100ie can communicate with Multiple PLC and...
Replies
1
Views
4,965
Hello We have installed several G.E. Fanuc 90 70 PLC Everything was ok but suddenly we can not communicate anymore with any PLC with the software...
Replies
0
Views
18
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
44
"Hello! Good day! Excuse me, I have a question regarding the 1761-NET-ENI. RSLinx has already detected it but it's not connecting to the PLC...
Replies
4
Views
79
How to fix if appears code “$115 plc-restart running” on the screen OP17
Replies
3
Views
113
Back
Top Bottom