HMI Programming - View Designer

cdwilliams496

Member
Join Date
Apr 2018
Location
Aiken, SC
Posts
19
I am trying to reduce the number of values behind the decimal point on the HMI.

The values it is reading are "REAL" values from the PLC.

I am using View Designer to program an AB 5510 HMI.


Thanks,

Davis

View HMI.JPG View HMI Code.JPG
 
I've never used View Designer but I would imagine that there is a numeric setting in the properties to set the digits before/after the decimal. Just reduce the amount should give you the results you want.
 

Similar Topics

Hello Everyone, I would like to get some advice on AB HMI programming. I am using factory talk to program my HMI and honestly I am not liking...
Replies
7
Views
5,996
Hey Guys, I am looking to bring some new guys onto my team and I was pondering the idea of doing a basic test just to weed out some peoeple that...
Replies
17
Views
2,751
Good afternoon. I just recently did my first Panelview Plus 1000 programming using Factory Talk View Studio ME. With a little bit of trial and a...
Replies
6
Views
2,970
Hi guys, Please I need a rough estimate or idea rather (in USD) For a PLC Programming and HMI screen design/configuration contract Project of 50...
Replies
36
Views
10,877
Looking to find a programming cable to download an already developed Quick Panel application which I have the software for. The hardware is a...
Replies
8
Views
4,977
Back
Top Bottom