Weinview MT8121iE HMI software

Hello,
one of my clients has weinview MT8121iE HMI. I uploaded the source code via Easy Builder Pro 6.02 and decompiled but when I need to download it again realized that the HMI doesnt support by EasyBuilderPro. I searched on internet and seen that the HMI can be programmed by EasyBuilderPro V4.00.11 and above versions. I tried almost every version of the EB but none has MT8121ie.


if anybody knows and tell me which program I need that will be very nice to me. Thanks in advance..

Hello. Try to read this
https://www.nvcnc.net/mt8000-faq.html


And try to download project by usb-cable (FAQ_29_How_to_install_USB_driver_of_HMI_i_series)


i`ve never worked with weinview, just simple MT81**iE and xE
i hope it will help you. Please, share your result


BR

thank you for your kind answer, but that didn't help me. I want to share the solution which I finally found.
Mentioned HMI produced for China domestic market and it is only available for Chinese installed Easy Builder Pro versions. When I install EB on Chinese language the HMI appeared on the menu.

Just in case anyone stumbles into this thread via google like I did - if you're using a Chinese market Weinview HMI that isn't listed in Easybuilder Pro, you'll need to download the Weinview version of Easybuilder Pro from Weinview.cn (don't worry - the software is in English) instead of weintek.com.

It has a completely different list of HMIs, most of them just one or two numbers off the American market. I believe this is their way of region locking the HMIs.

Be warned though - I've had this work with the all-in-one HMIs, however the headless FHDX series appears to also have something else going on, so don't count on buying a 520 or 920 and and getting it to work outside of Asia. I'll update this post if I can figure out how to get the FHDX series working.

To add, I've had to use a 3rd variant of Easy Builder Pro from Maple Systems for even further models that aren't listed in the Weintek China nor Weintek USA variants.