FATEK FBs

TheDude_Abides

Member
T
Join Date
Sep 2018
Location
Chattanooga
Posts
68
So I was able to connect to the PLC briefly. I ended up making my own RS232 comm cable since my previous post. However, It reads the PLC to 5% and then it throws an error messge:

"Can't open the customer id file (fatek(a).cif)"

Anyone have the slightest idea of what I am up against?
 

Similar Topics

F
Use of in built timers in Interrupt Service Routine-FATEK FBs Series PLC
Dear all, I want to use the interrupt service routine in FATEK PLC using WinproLadder Software. I had configured the interrupt in software as...
2
Replies
17
Views
1,562
drbitboy
drbitboy
W
Fatek FBs-60MC and XY-MD02 problems
Hello everyone , is my first post here . I used before Automation direct , siemens and proface HMI and PLC , but i never programed a MODBUS RTU ...
Replies
3
Views
1,146
wangine
W
A
How to connect FATEK FBs-60MA with Delta Dop series
I tried connection as shown in the picture but receiving error " communication error F. ... Controller station no. Error"
Replies
1
Views
1,502
Ashraf33
A
T
FATEK FBs Comm issue
We have a 176 ton press that I want to pull the program off of the FATEK PLC. I have been dealing almost exclusively with Allen Bradley and am...
Replies
1
Views
2,737
aravindh.emerick
A
A
How to create floating point register in Fatek Fbs PLC?
Hi; I have been the user of Allen Bradley PLCs but now working on programing of Fatek FBs PLCs. I want to know how do I create a floating point...
Replies
0
Views
2,094
AB2005
A
Back
Top Bottom