COP Instruction

roxusa

Lifetime Supporting Member
R
Join Date
Nov 2008
Location
NJ
Posts
994
I am using RS500 in a Micrologix 1400
I have a COP instruction
Source #N27:30
Destination #N27:1
Length 5
This is set on First Pass Bit Yet it only moves N27:30 into N27:1
Shouldn't it move it into N27:1 through N27:5
What am I missing, I am running on Emulate.
 
No, The "COP" instruction will copy..
N27:30 to N27:1
N27:31 to N27:2
N27:32 to N27:3
N27:33 to N27:4
N27:34 to N27:5

If you want N27:30 into N27:1 thru N27:5 then use the "FLL" instruction
 

Similar Topics

T
CCW the COP instruction and 0xF860 error
We're converting a machine's control from CompactLogix to Micro800. It was originally going to be on a Micro850. However, because we've ended up...
Replies
2
Views
1,585
technolog
T
L
Studio5000 IB8S COP Instruction
Long time lurker, first time poster.. I've been working with PLCs for a while now and have ran into a head scratcher that I was hoping someone...
Replies
8
Views
2,234
WebHandler
W
M
Is Cop instruction need time to be executed ?
Hi experts, I'm troubleshooting a program with rslogix5000. there is many cop instruction of array, but sometimes some data are not copied. As...
Replies
11
Views
3,250
drbitboy
drbitboy
W
Confused on COP instruction in Logix 5000
Good morning everyone. I am apparently confused on the COP instruction. What I am trying to do is copy a DINT to a DINT in a User Defined Data...
2
Replies
16
Views
6,929
daba
D
busarider29
Question with COP instruction in Logix500
Greetings from Michigan, I have to edit some code that was not written by me. The existing code works but I'm hazy on exactly what is going on...
Replies
2
Views
1,335
busarider29
busarider29
Back
Top Bottom