tec.batista
Member
Hi there,
I need a signal from my VFD to inform my program that everything is OK. I see this bit (TripPresent) on "https://literature.rockwellautomation.com/idc/groups/literature/documents/um/290e-um001_-en-p.pdf" - page 96. My question is when there is a fault within the VFD this bit(TripPresent) goes from "1" to "0" or this bit goes from "0" to "1"? I've been shearching but unfortunatelly I haven't find the answer.
Thanks for your help in advance.
I need a signal from my VFD to inform my program that everything is OK. I see this bit (TripPresent) on "https://literature.rockwellautomation.com/idc/groups/literature/documents/um/290e-um001_-en-p.pdf" - page 96. My question is when there is a fault within the VFD this bit(TripPresent) goes from "1" to "0" or this bit goes from "0" to "1"? I've been shearching but unfortunatelly I haven't find the answer.
Thanks for your help in advance.