¿how access to honeywell IPC620-25?

plc'r'us

Member

P

Join Date

Nov 2003

Posts

45

• Sep 30, 2004

• #1

Hi everybody,

I have to check an old IPC620-25 Honeywell CPU and I don´t know which is the apropriate programming software. Really I don´t know anything about this PLC....

I tried on Honeywell web but it doesn´t appear now.


Somebody can help me?

Thanks

 

snimra

Member

S

Join Date

May 2004

Location

malaysia

Posts

27

• Sep 30, 2004

• #2

There is a program called "Loader" (DOS based) to access the logic.
You have to have a communication cable and a converter (RS422 to RS232) to communicate .

 

plc\'r\'us

Guest

P

• Oct 1, 2004

• #3

Thank you Snimra. Your reply is very helpful.

Do you know the pin assignment of the communication cable?

Thanks

 

snimra

Member

S

Join Date

May 2004

Location

malaysia

Posts

27

• Oct 1, 2004

• #4

I'm afraid I don't have the answer for that but I believe it is a standard for RS422 to RS232 converter. You can check it in the net on the pin assignment (9 pins, some not used).
The easiest way is to get it from the vendor.

 

bodis

Member

B

Join Date

Sep 2004

Posts

32

• Oct 1, 2004

• #5

Hi!
On Germanish only, but for good gay this is not problem

 

plc'r'us

Member

OP

P

Join Date

Nov 2003

Posts

45

• Oct 4, 2004

• #6

i´m impressed

It´s wonderful, i am very happy for your responses.


I´ll test the communication as soon as i can.

Thank you very much.