You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old October 19th, 2017, 03:01 PM   #1
Macly
Member
Canada

Macly is offline
 
Join Date: Mar 2017
Location: Milton
Posts: 3
1769-AENTR Web Login

Hi everyone,

I am trying to set the IP addresses in a 1769-AENTR module through its web page.
Does anyone know what the login info is?
Thank you very much
  Reply With Quote
Old October 19th, 2017, 03:16 PM   #2
gclshortt
Member
Canada

gclshortt is offline
 
gclshortt's Avatar
 
Join Date: Dec 2014
Location: Cobourg
Posts: 2,482
http://www.plctalk.net/qanda/showthread.php?t=75298

http://www.plctalk.net/qanda/showthread.php?t=90048

"Another method, if all else fails, is to use the adapters web page. Set the address switches to something like 20 and power cycle. The IP address should now be 192.168.1.20, Subnet 255.255.255.0. Set your PC to 192.168.1.10 and 255.255.255.0, or similar. Ping the adapter to check you can "see it". Open a web browser and navigate to the adapter IP address. Login with user: "administrator", password: "blank". Under "Network Configuration" configure the adapter for Static and set your new IP address and Subnet. Apply changes. Change address switches away from 20 to above 254 (not 888 or 999). Power cycle and the new address should be active. "

The above threads should help you out.
Regards,
__________________
Garry
http://www.accautomation.ca
Connect with us on Facebook: facebook.com/accautomation/
  Reply With Quote
Old October 19th, 2017, 03:24 PM   #3
Macly
Member
Canada

Macly is offline
 
Join Date: Mar 2017
Location: Milton
Posts: 3
Quote:
Originally Posted by gclshortt View Post
http://www.plctalk.net/qanda/showthread.php?t=75298

http://www.plctalk.net/qanda/showthread.php?t=90048

"Another method, if all else fails, is to use the adapters web page. Set the address switches to something like 20 and power cycle. The IP address should now be 192.168.1.20, Subnet 255.255.255.0. Set your PC to 192.168.1.10 and 255.255.255.0, or similar. Ping the adapter to check you can "see it". Open a web browser and navigate to the adapter IP address. Login with user: "administrator", password: "blank". Under "Network Configuration" configure the adapter for Static and set your new IP address and Subnet. Apply changes. Change address switches away from 20 to above 254 (not 888 or 999). Power cycle and the new address should be active. "

The above threads should help you out.
Regards,
Thanks for the reply. This information is for 1747-AENTR. Apparently the login info for 1769-AENTR is different. I have tried "administrator/blank" and it didn't work.
  Reply With Quote
Old October 19th, 2017, 03:53 PM   #4
Lovell
Member
Canada

Lovell is offline
 
Lovell's Avatar
 
Join Date: Feb 2013
Location: Saskatchewan
Posts: 67
did you try admin/<blank> or admin/admin?
  Reply With Quote
Old October 19th, 2017, 04:04 PM   #5
gclshortt
Member
Canada

gclshortt is offline
 
gclshortt's Avatar
 
Join Date: Dec 2014
Location: Cobourg
Posts: 2,482
http://literature.rockwellautomation...n002_-en-p.pdf

Sometimes the password is reset to the serial number of the adapter.

Regards,
__________________
Garry
http://www.accautomation.ca
Connect with us on Facebook: facebook.com/accautomation/
  Reply With Quote
Old October 20th, 2017, 07:05 AM   #6
Macly
Member
Canada

Macly is offline
 
Join Date: Mar 2017
Location: Milton
Posts: 3
Thanks guys for the help. I contacted Rockwell support and apparently it is username "administrator" and password "the serial number shown on the webpage".
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
1769 AENTR comm's on power cycle John Morris LIVE PLC Questions And Answers 16 August 3rd, 2017 05:33 PM
Siemens Web Server Login XxLinkxX LIVE PLC Questions And Answers 1 February 24th, 2016 12:56 PM
FTV SE: Login each client ytangsuan LIVE PLC Questions And Answers 1 November 1st, 2014 04:05 AM
IDEC Web Server Stationmaster LIVE PLC Questions And Answers 2 February 26th, 2009 11:27 AM
Mirroring RSView32 Web Server PCTDavis LIVE PLC Questions And Answers 0 January 7th, 2004 08:08 AM


All times are GMT -5. The time now is 07:41 AM.


.