AB Micro 820 Controlling 525 Drive - PLCS.net

aandjsam · October 24th, 2017, 02:42 AM

Hi all,

I've been handed over a project for a simple conveyor control system, what I've been given is a Micro 820 PLC and 3 AB 525 Drives, I've been asked to control them via an un-managed switch through Ethernet.

I was wondering if this was possible and if so, which function block is used to communicate with the drive?

Thanks in advance,
Sam

AustralIan · October 24th, 2017, 03:09 AM

http://literature.rockwellautomation...r003_-en-p.pdf

ccsimp-qr003 from rockwell describes your setup.

damica1 · October 24th, 2017, 07:03 AM

Yes it can be done, I do believe you can download from their support website the function blocks that you would need.

Really should not be that big of a deal. I have never used a 525 drive but I have used a micro820 communicating with a Schneider ATV630 thru Modbus/TCP.

October 24th, 2017, 02:42 AM	#1
aandjsam Member Join Date: Sep 2016 Location: lincolnshire Posts: 11	AB Micro 820 Controlling 525 Drive Hi all, I've been handed over a project for a simple conveyor control system, what I've been given is a Micro 820 PLC and 3 AB 525 Drives, I've been asked to control them via an un-managed switch through Ethernet. I was wondering if this was possible and if so, which function block is used to communicate with the drive? Thanks in advance, Sam

October 24th, 2017, 07:03 AM	#3
damica1 Member Join Date: Aug 2015 Location: Illinois Posts: 356	Yes it can be done, I do believe you can download from their support website the function blocks that you would need. Really should not be that big of a deal. I have never used a 525 drive but I have used a micro820 communicating with a Schneider ATV630 thru Modbus/TCP. __________________ David M. Camp Automation Engineer Marshall Electric / www.mei-tech.com PLEASE READ: https://www.prlog.org/12642091-marsh...-industry.html PLEASE READ: https://www.prlog.org/12680572-marij...hold-word.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
AB Micro 820 re-connecting	B777	LIVE PLC Questions And Answers	1	February 3rd, 2017 06:56 AM
Help required to communicate to an AB pf 525 drive with ethernet i/p communications	Murrayt	LIVE PLC Questions And Answers	12	November 26th, 2013 12:56 AM
AB Drive Question	mrtweaver	LIVE PLC Questions And Answers	2	August 5th, 2013 11:21 PM
AB Micro 1100and small panel view retrieving data	redwood1957	LIVE PLC Questions And Answers	5	September 16th, 2010 10:37 AM
AB Drive Tools(V2.06) W/SC 300 Interface	Vietnam Bob	LIVE PLC Questions And Answers	0	November 20th, 2002 09:19 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

October 24th, 2017, 03:09 AM	#2
AustralIan Member Join Date: Jan 2013 Location: UK Posts: 650	http://literature.rockwellautomation...r003_-en-p.pdf ccsimp-qr003 from rockwell describes your setup.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)