You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old December 8th, 2017, 02:16 AM   #1
munguni
Member
Zimbabwe

munguni is offline
 
Join Date: Feb 2012
Location: HARARE
Posts: 13
slc 5/3 major error S:6 =654H

I have an SLC 5/3 with an SLC 500 anaolg input module, 1746-NI4. Each time that i want to go online (with no inputs connected) the processor goes into fault mode showing the above error.

The error mesage is : the module in slot 6 which is required for the user program is detected as being the wrong type:and the other message with SLC5/1 IS:the module has not responded to a lock shared memory command within the required time limit

what do l do
  Reply With Quote
Old December 8th, 2017, 09:20 AM   #2
James Mcquade
Member
United States

James Mcquade is offline
 
Join Date: Oct 2007
Location: Tennessee
Posts: 2,147
If possible,
please zip your program and attach it so we can look at it.

error xx54 - the module detected is different than what you have programmed in the plc. your card is a 1746-ni4, you may have configured it as a 1746-nio4v or you have it in the wrong slot.

james.
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
slc 500 CPU 5/3 hiren gajera LIVE PLC Questions And Answers 8 July 18th, 2014 05:29 AM
SLC 5/5 and 5/3 over internet interface themodyman LIVE PLC Questions And Answers 1 December 31st, 2010 09:17 PM
SLC 5/3 cpu fault mvannantn LIVE PLC Questions And Answers 3 August 26th, 2010 08:56 AM
SLC 500 Ethernet Setup JSPLC LIVE PLC Questions And Answers 3 June 1st, 2010 04:15 PM
memory module in slc 5/3 realolman LIVE PLC Questions And Answers 2 May 20th, 2009 09:56 AM


All times are GMT -5. The time now is 04:40 AM.


.