Program info - PLCS.net

agrippa · November 12th, 2002, 07:37 PM

In the allen bradley programs what do the numbers mean under the bit?
what does the move control do.
Is there a good book out there that can explain all the controls?

randylud · November 12th, 2002, 07:58 PM

You should contact your nearest Allen-Bradley distributor and request the SLC500 Instruction Set manual. The publication number is 1747-RM001C-EN-P Sept. 2001. Or, go to AB.com and click on manuals online, click on control processors, click on SLC500 programmable controllers and then find the pub number and right click on that and save it to your hard drive. If you use dial-up ISP, then take a trip to town or go to a movie cause the manual is a 6.5 meg download. If you have DSL or other high speed ISP, you are in luck and will only have to invest a few mins in the download. This maunal will explain every thing you need to know about the AB SLC and MicroLogix family of PLCs.
Randy L.

November 12th, 2002, 07:37 PM	#1
agrippa Member Join Date: Nov 2002 Location: Indiana Posts: 7	Program info In the allen bradley programs what do the numbers mean under the bit? what does the move control do. Is there a good book out there that can explain all the controls?

November 12th, 2002, 07:58 PM	#2
randylud Member Join Date: Oct 2002 Location: Greensboro,NC Posts: 933	AB program instructions You should contact your nearest Allen-Bradley distributor and request the SLC500 Instruction Set manual. The publication number is 1747-RM001C-EN-P Sept. 2001. Or, go to AB.com and click on manuals online, click on control processors, click on SLC500 programmable controllers and then find the pub number and right click on that and save it to your hard drive. If you use dial-up ISP, then take a trip to town or go to a movie cause the manual is a 6.5 meg download. If you have DSL or other high speed ISP, you are in luck and will only have to invest a few mins in the download. This maunal will explain every thing you need to know about the AB SLC and MicroLogix family of PLCs. Randy L.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Subroutine philosophy	Doug-P	LIVE PLC Questions And Answers	31	February 11th, 2013 07:40 AM
Simulator, Simulation, Shadow Code	Terry Woods	LIVE PLC Questions And Answers	1	January 2nd, 2005 01:40 PM
RS logix program Allen Bradley	GIVITSUM	LIVE PLC Questions And Answers	14	May 5th, 2004 07:51 AM
Last Rung	rookie1	LIVE PLC Questions And Answers	17	November 18th, 2002 05:57 PM
SLC 5/03 data loss	andydaoust	LIVE PLC Questions And Answers	1	October 10th, 2002 06:38 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)