AB Micro 1000 retenitive data lost error - PLCS.net

jjkisner · November 18th, 2005, 11:12 AM

I get a retenitive data lost error on my micro 1000.
I reset it in the morning it will run all day but the next morning it will error out again. Does anyone have any ideas?

Ken Roach · November 18th, 2005, 11:30 AM

Search the Forum for the keywords "fat green wire".

This error virtually always indicates a voltage or noise spike somewhere in your installation. A quality ground connection can cure many of these problems, and you're going to want to carefully examine any inductive output loads to make sure they have proper surge suppression installed.

November 18th, 2005, 11:12 AM	#1
jjkisner Member Join Date: Nov 2004 Location: Northen Illinois Posts: 16	AB Micro 1000 retenitive data lost error I get a retenitive data lost error on my micro 1000. I reset it in the morning it will run all day but the next morning it will error out again. Does anyone have any ideas?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
AB PLC Micro Logic 1000	Jason H	LIVE PLC Questions And Answers	13	May 8th, 2005 11:09 PM
Connecting a Micro Logic 1000 to the internet	jpd24	LIVE PLC Questions And Answers	2	March 25th, 2003 10:01 PM
Need to pause an output on an AB 1000	Leon Schon	LIVE PLC Questions And Answers	25	March 13th, 2003 06:12 PM
AB RSLOGIX DATA FILE	PERSPOLIS	LIVE PLC Questions And Answers	2	December 27th, 2002 08:25 PM
Data Cartridge AB PLC-2 style	okiebob	LIVE PLC Questions And Answers	2	November 29th, 2002 05:38 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

November 18th, 2005, 11:30 AM	#2
Ken Roach Lifetime Supporting Member + Moderator Join Date: Apr 2002 Location: Seattle, WA Posts: 8,581	Search the Forum for the keywords "fat green wire". This error virtually always indicates a voltage or noise spike somewhere in your installation. A quality ground connection can cure many of these problems, and you're going to want to carefully examine any inductive output loads to make sure they have proper surge suppression installed.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)