      |
||
 |
||
    This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc. |
||
 Try our online
PLC Simulator- FREE.
Click here now to try it.
| ||
New Here? Please read this important info!!!
December 9th, 2005, 09:11 AM
|
#1 |
|
Member
 
Join Date: Dec 2005
Location: augusta,GA
Posts: 8
|
Start Different Conveyor Using Timer
Can someone help me to write a plc SLC500 program :
THE CONVEYOR NEED TO BE ON FOR ALL CYCLE TO CHECK TIRES OR MAKE THIS TIRE INSPECTION PROCESS -START_Push Button. if start turn green LED ON -STOP PB turn red LED ON -If start, INCLINE CONVEYOR ON>>> OUTPUT 1 -wait (TON) ...> OUTPUT 1/DN -CENTER CONVEYOR ON >>>> OUTPUT 2 -wait (TON)....> OUTPUT 2/DN -BCODE CONVEYOR ON >>>> OUTPUT 3 -wait TON)....> OUTPUT 3/DN -VISION CONVEYOR ON>>>> OUTPUT 4 -wait (TON) ....> OUTPUT 4/DN - INSERT A ROUTINE PROGRAM CALL X-RAY - ACCUMULATOR CONVEYOR - INSPECTION CONVEYOR - TAKE AWAY CONVEYOR - REJECT CONVEYOR -LOADER CONVEYOR ON >>> OUTPUT 5 |
|
|
December 9th, 2005, 09:58 AM
|
#2 |
|
Member
Join Date: May 2004
Location: Upstate South Carolina
Posts: 2,325
|
Post what you've written so far, and we will take a look at it.
Ken
__________________
"To give real service you must add something that cannot be bought or measured with money; and that is sincerity and integrity." - Donald A. Adams |
|
|
|
December 9th, 2005, 10:14 AM
|
#3 |
|
Member
Join Date: Jun 2005
Location: Montreal, Quebec
Posts: 225
|
You should also explain the process a little more. It appears that you want to use timers instead of sensing product. If this is the case, my experience tells me that you will eventually run into problems as the machine physical condition changes.
|
|
|
|
December 9th, 2005, 12:17 PM
|
#4 |
|
Member
Join Date: Dec 2005
Location: augusta,GA
Posts: 8
|
plc program
My program is save as RSS IN SLC500. I DON'T HOW TO ATTACH THIS FILE BECAUSE IT SAYS INVALID
|
|
|
|
December 9th, 2005, 01:06 PM
|
#5 |
|
Member
Join Date: Sep 2003
Location: Fort Worth, Texas
Posts: 885
|
Can you save your .RSS to a PDF? Then you should be able to post it.
__________________
Mark A. Crowley Automation is not a corrective action for a lack of discipline. |
|
|
|
December 9th, 2005, 02:22 PM
|
#6 |
|
Member
Join Date: May 2004
Location: Upstate South Carolina
Posts: 2,325
|
Either zip the .rss program or just change the extension to .zip, let us know which one you used.
Ken
__________________
"To give real service you must add something that cannot be bought or measured with money; and that is sincerity and integrity." - Donald A. Adams |
|
|
|
December 9th, 2005, 02:45 PM
|
#7 |
|
Member
Join Date: Dec 2005
Location: augusta,GA
Posts: 8
|
o.k
|
|
|
 |
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Topics
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| A plea for help...and mentor | damianjones | LIVE PLC Questions And Answers | 72 | February 7th, 2007 11:10 AM |
| Siemens S7400 timer value preset help | kegman | LIVE PLC Questions And Answers | 2 | October 4th, 2005 08:53 PM |
| Setting Step 7 ODT Timer Start Value | Rusty_K | LIVE PLC Questions And Answers | 4 | July 11th, 2005 08:52 AM |
| difference between S7-300 and S7-200 timer | Pandiani | LIVE PLC Questions And Answers | 8 | April 27th, 2005 07:13 AM |
| Programing Problem | tielp | LIVE PLC Questions And Answers | 3 | January 7th, 2003 05:45 PM |
You are not registered yet. Please click here to register!
Linear Mode
