WinCC front/back didnt works - PLCS.net

Neviem · July 20th, 2006, 03:52 AM

Hi all,

I have SIMATIC WinCC V6.0 SP3a Build: 6.1.1.0

When I try to bring one object front/back it works.
When I make (from those several objects) one group, then front/back doesnt works.
When I make some new object, front/back also doesnt works.
I have in project one big background (as part of group) and it is always on top and front/back also doesnt works on this group.

Thanks for any help.

stplanken · July 20th, 2006, 11:30 PM

The front/back function only affects objects on the same layer, so verify that the objects you are trying to manipulate are not on different layers. I have never seen what you described but maybe using separate layers can solve the problem with your background by placing the background object on a lower layer than the objects in front of it.

By the way, I would bring WinCC to SP4.

July 20th, 2006, 03:52 AM	#1
Neviem Member Join Date: Jul 2006 Location: Bratislava Posts: 2	WinCC front/back didnt works Hi all, I have SIMATIC WinCC V6.0 SP3a Build: 6.1.1.0 When I try to bring one object front/back it works. When I make (from those several objects) one group, then front/back doesnt works. When I make some new object, front/back also doesnt works. I have in project one big background (as part of group) and it is always on top and front/back also doesnt works on this group. Thanks for any help.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Simatic Wincc Flexible 2004 -->2005	STL???	LIVE PLC Questions And Answers	8	August 29th, 2006 05:42 AM
WinCC project reading STEP 7 project symbol table	Pandiani	LIVE PLC Questions And Answers	1	August 11th, 2005 03:20 PM
WinCC 5.0 sp2, save tags in CSV problem	johnny	LIVE PLC Questions And Answers	3	May 26th, 2005 07:22 PM
Different WinCC and WinCC server option	huynt	LIVE PLC Questions And Answers	1	November 15th, 2004 09:13 AM
WinCC 6.0 version problems	Fritz_frederix	LIVE PLC Questions And Answers	1	July 6th, 2004 10:31 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

July 20th, 2006, 11:30 PM	#2
stplanken Member Join Date: May 2006 Location: Alberta Posts: 49	The front/back function only affects objects on the same layer, so verify that the objects you are trying to manipulate are not on different layers. I have never seen what you described but maybe using separate layers can solve the problem with your background by placing the background object on a lower layer than the objects in front of it. By the way, I would bring WinCC to SP4.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)