PLC GE 90-30, Software LM90 - PLCS.net

rhaque · August 7th, 2006, 03:24 AM

hello, we have a packaging maching which run by GE-90-30 plc, and the software is LM90. the maching was stopped few weeks ago & the cpu run light was stopped. i thout the plc was removed. recently i join the company. i got a software from local indentor & the programme backup. the softeare run in dos mode. could any one help me to how to upload the programe from backup. i never use this software. but i use versapro software

thnx & regrds

Steve Bailey · August 7th, 2006, 05:00 AM

Create a program with the desired name. Make it simple, just a single rung. Then make a backup of it. Once you have done that, copy all of the files from the actual backup disk to the "Backup" subdirectory that LM90 created when you backed up the simple program. The path is probably "C:\LM90\Yourprogramname\Backup". Now go through the "Restore from Backup" procedure in LM90.

rhaque · August 7th, 2006, 11:48 PM

Mr. Steve could you please give provide me the working manual of LM90
thx

BobB · August 8th, 2006, 03:53 AM

Here is a link to the GE-Fanuc website where you can become a member and download manuals etc

https://eservice.gefanuc.com/login/e...Name%3DManuals

Steve Bailey · August 8th, 2006, 06:13 AM

Go here

http://globalcare.gefanuc.com/

Click on "Product Manuals, No Login Required"

August 7th, 2006, 03:24 AM	#1
rhaque Member Join Date: Aug 2006 Location: Dhaka Posts: 2	PLC GE 90-30, Software LM90 hello, we have a packaging maching which run by GE-90-30 plc, and the software is LM90. the maching was stopped few weeks ago & the cpu run light was stopped. i thout the plc was removed. recently i join the company. i got a software from local indentor & the programme backup. the softeare run in dos mode. could any one help me to how to upload the programe from backup. i never use this software. but i use versapro software thnx & regrds

August 7th, 2006, 11:48 PM	#3
rhaque Member Join Date: Aug 2006 Location: Dhaka Posts: 2	need the working manuals of LM90 Mr. Steve could you please give provide me the working manual of LM90 thx

August 8th, 2006, 03:53 AM	#4
BobB Lifetime Supporting Member Join Date: Jun 2002 Location: Sydney Posts: 3,294	Here is a link to the GE-Fanuc website where you can become a member and download manuals etc https://eservice.gefanuc.com/login/e...Name%3DManuals __________________ The Old Pfhaart

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
GE Fanuc Software "Dongle"	CaseyK	LIVE PLC Questions And Answers	14	June 29th, 2005 10:08 PM
Ge Fanuc 90-30 PLC & PCM Module ASCII Data Application	Drewie	LIVE PLC Questions And Answers	2	April 6th, 2005 10:34 PM
DL305 PLC and LogicMaster Software	CaseyK	LIVE PLC Questions And Answers	4	June 2nd, 2004 12:07 AM
Wanted software tools for analyzing existing PLC programs	kailashmariappan	LIVE PLC Questions And Answers	3	April 21st, 2004 03:17 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

August 7th, 2006, 05:00 AM	#2
Steve Bailey Lifetime Supporting Member + Moderator Join Date: Apr 2002 Location: The boondocks of Western Massachusetts USA Posts: 4,664	Create a program with the desired name. Make it simple, just a single rung. Then make a backup of it. Once you have done that, copy all of the files from the actual backup disk to the "Backup" subdirectory that LM90 created when you backed up the simple program. The path is probably "C:\LM90\Yourprogramname\Backup". Now go through the "Restore from Backup" procedure in LM90.

August 8th, 2006, 06:13 AM	#5
Steve Bailey Lifetime Supporting Member + Moderator Join Date: Apr 2002 Location: The boondocks of Western Massachusetts USA Posts: 4,664	Go here http://globalcare.gefanuc.com/ Click on "Product Manuals, No Login Required"

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)