![]() ![]() ![]() ![]() ![]() ![]() |
||
![]() |
||
![]() ![]() ![]() ![]() This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc. |
||
![]()
|
New Here? Please read this important info!!!
![]() |
#1 |
Guest
Posts: n/a
|
AB DH+ connector
I am looking for Allen Bradley DH+ connector (3 pin connector) (1,sh,2) for connecting my PLCs in a network. What is Allen bradley part no. for this 3 pin connector.
I found in one of the connector with the below details: Make: phoenix contact Part no.: MSTB2.5 Description: Removable wire connect plug But when i contacted phoenix contact they said they donot have this part no. anymore. I need 50 nos. of this connector. Your suggestion needed thanks |
![]() |
![]() |
#2 |
Member
|
I believe this is the part you are looking for:
Mating Connector for remote I/O / DH+: A-B PN 941999-03 or Phoenix Order No. 1849396 Kim |
![]() |
![]() |
#3 |
Member
![]() ![]() Join Date: Feb 2003
Location: Georgia
Posts: 104
|
Also the Allen-Bradley part # 22112-046-03 is the connector for DH and remote I/O. You may be able to look at the connector on page 2-13 of this manual.
http://www.ab.com/manuals/eoi/pdf/2711E-821.pdf Good Luck |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
Thanks
Many thanks to Kim Gold and Shahn4 for your kind help
Gautham |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
DH+ connector
Dear Mr.Kim gold and Shahn4
I found out part no.: 22112-046-03 in ab website at the mentioned Panelview manual. I also searched the price for this connector in AB shop-online website and found the price to be USD 14.40. which is quite expensive. SO i went on to search for the Phoenix contact part no. but the website could not recognise the phoenix order no.(article no.) 1849396 also i could not find AB Part no. 941999-03 Below is what i searched in AB Knowledgebase Doc. ID:9996 "Programmable controller piece parts" TERMINAL CONNECTORS: Part no.: 940611-03 3 position 1785-LT, LT2, LT3, LT4, L40B/L, L60B/L 1771-AM1, AM2 remote I/O connector ,1775-S5/SR5 Part no.: 940874-01 Female section of terminal connector 3 pos But could not find the price for them in AB website. Can you please let me know the part for phoenix contact 3 position connector for DH+/RIO. Many thanks again |
![]() |
![]() |
#6 |
Member
|
You can find the part numbers in the manual for the 1784-PKTX card.
The manual is available at The Automation Bookstore Search for item number: 1784-6.5.27 See page 4-5 |
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
Thanks
Thanks Kim gold. You are correct. I saw those part no. in PKTX manual after reading your post. But could not find this part no. in Phoenix website. www.phoenixcon.com.
Is there any other source from where i can buy this connector for good price. Many thanks again |
![]() |
![]() |
#8 |
Member
|
Look for the Phoenix # at any electronic house that carries Phoenix products--Newark, Allied, etc.
__________________
The Big Cheese |
![]() |
![]() |
#9 |
Member
|
I guess these connectors must be stocked under a variety of numbers. I just found one, still in the original bag labeled:
Bulletin 2706 Renewal Part RIO CONNECTOR CAT 46708-605-01 |
![]() |
![]() |
#10 |
Member
![]() ![]() Join Date: Jul 2011
Location: Missouri
Posts: 34
|
Here ya go, better late than never
I'm in the same boat, i have a few SLC 5/04 that are missing the 3 pin DH+ connector on the front of the processor. My local AB distributor says that they are $39 a piece. I found them here for under $3.00
http://www.alliedelec.com/search/pro...x?SKU=70055446 |
![]() |
![]() |
Bookmarks |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
AB DH+ connector source | Ken Moore | LIVE PLC Questions And Answers | 7 | July 29th, 2004 02:03 PM |
AB journey | Tim | LIVE PLC Questions And Answers | 18 | December 18th, 2003 07:51 PM |
Calling all AB Reps! Help! | Vetteboy | LIVE PLC Questions And Answers | 6 | August 30th, 2003 02:03 AM |
AB Bashing | okiebob | LIVE PLC Questions And Answers | 6 | February 6th, 2003 11:11 PM |
AB Software | UK Homer | LIVE PLC Questions And Answers | 1 | February 3rd, 2003 02:26 PM |