schematic for Transmation 1045 calibrator - PLCS.net

danw · October 1st, 2006, 09:56 PM

Does anyone have a schematic for a Transmation 1045 milliamp calibrator? Hidden in the filing cabinet?

Dan

danw · November 2nd, 2014, 04:13 PM

After an 8 year search, I found schematics for my Transmation 1045

a jpg scan is attached for each of the two schematics

shooter · November 3rd, 2014, 11:23 AM

so you answered your own question after 8 years, my memory is shorter hihi.
is it still working ?

danw · November 3rd, 2014, 01:34 PM

The early version manuals had a schematic, later versions do not.

Yes, the calibrator has been working all those years.

But I know that there's a internal resistor that will burn out, like a fuse, if the input current is too high, in order to protect the sensing circuit.

So I've continued to look for a schematic in case that ever happens, to be able to know what's what.

I bought a used 1045 for 'parts' that included the 1984 manual and there were the schematics in the manual.

Pixel · June 18th, 2015, 05:24 AM

Hi! You're a lucky man. Perhaps you could fill up this drawing better quality?

October 1st, 2006, 09:56 PM	#1
danw Member Join Date: Oct 2004 Location: midwest, USA Posts: 2,740	schematic for Transmation 1045 calibrator Does anyone have a schematic for a Transmation 1045 milliamp calibrator? Hidden in the filing cabinet? Dan

November 3rd, 2014, 11:23 AM	#3
shooter Member Join Date: Sep 2002 Location: duketown Posts: 2,628	so you answered your own question after 8 years, my memory is shorter hihi. is it still working ? __________________ shooter@home.nl skype shooter paul.deelen Computer Shooter Paul Deelen J. Wassenaerstraat 29 NL 5224 GG 's-Hertogenbosch +31653300739

June 18th, 2015, 05:24 AM	#5
Pixel Member Join Date: Jun 2015 Location: Budapest Posts: 1	Acopos 1045 wiring diagram Hi! You're a lucky man. Perhaps you could fill up this drawing better quality?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
schematic diagram	jane nthambi	LIVE PLC Questions And Answers	3	September 3rd, 2006 10:17 AM
DIfference between single line & schematic drawing?	ckchew666	LIVE PLC Questions And Answers	11	May 30th, 2006 06:35 PM
Schematic question - which is proper?	TimothyMoulder	LIVE PLC Questions And Answers	27	February 15th, 2006 12:05 PM
Electrical schematic and sundry questions from a PLC virgin.	ericvfsu	LIVE PLC Questions And Answers	2	October 17th, 2004 05:30 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

November 3rd, 2014, 01:34 PM	#4
danw Member Join Date: Oct 2004 Location: midwest, USA Posts: 2,740	The early version manuals had a schematic, later versions do not. Yes, the calibrator has been working all those years. But I know that there's a internal resistor that will burn out, like a fuse, if the input current is too high, in order to protect the sensing circuit. So I've continued to look for a schematic in case that ever happens, to be able to know what's what. I bought a used 1045 for 'parts' that included the 1984 manual and there were the schematics in the manual.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)