TConnolly
Lifetime Supporting Member
What is the schematic symbol for a vortex flow meter?
OT: Symbol for vortex flow meter
- Thread starter TConnolly
- Start date
geniusintraining
Lifetime Supporting Member + Moderator
The only one I could find....this is Visio, nothing in (my) CAD
TConnolly
Lifetime Supporting Member
OP
Thanks GIT.
That looks like a P&ID symbol. Here is what I was thinking of using but after looking at your symbol I could simplify it a bit. I'll see what others suggest if anything.
That looks like a P&ID symbol. Here is what I was thinking of using but after looking at your symbol I could simplify it a bit. I'll see what others suggest if anything.
Tom Jenkins
Lifetime Supporting Member
When I have an odd instrument in an electrical schematic, I simply show it as a block with terminals for the signal and the power. Then I label it with the name and tag number. For schematic purposes, unlike a P&ID, the nature of the instrument is immaterial.
Gerry M
Member
I do the same as Tom for a schematic. Just a "Black Box" with terminals and a label.
Similar Topics
Hello everyone,
Recently, my Archestra IDE shut down while I was editing. After restarting the IDE, I noticed warning symbols under my opened...
I was looking for this function, so that i doesn´t need to do it in the PLC.
If there are an alarm in the alarm list, i want to flash the...
Hello, fairly new to plcs I’m tasked with installing a PE to a micrologix1200, in the attached picture I/14 is the PE I’m installing it’s going to...
Hello
Thank you all for your support.
I am actually experience same issues with TIA portal V17 update5 as well as V18.
The problem is with the...
Hi all,
I've inherited someone else's program and can't for the life of me figure out his use of the # symbol in one of his structured text...