ProWORX 32 - PLCS.net

blawrenz · November 2nd, 2006, 07:07 AM

I am using ProWORX 32 version 2.0 for a project that I am working on. When I go to print my networks out from the report generator. I am unable to read the comments and addresses on the print-out. I have been able to get around this by right-clicking on the current network displayed and just printing individual networks but I have not been able to figure out how or if the font size can be changed on the comments and addresses. I have even tried exporting to a PDF and others with no success. Does anyone have any suggestions??

Thanks in advance.
Brad

Sliver · November 2nd, 2006, 11:20 AM

Brad,

This may not be your issue, but check this thread for info on Proworx32 ver 2.0 reporting problems.It may get you going.

By the way, how does the report look in the preview screen?

Brian.

blawrenz · November 3rd, 2006, 06:46 AM

Brian,

I checked out that thread and tried the things that had been posted and was unable to get what I wanted. I am having the opposite problem that you had, the text is so small that you can't read it without a magnifying glass. So instead of changing from Large to Normal, I changed mine from Normal to Large and it basically looked about the same.

As far as how that it looks on the preview screen, again it is very small you can zoom in on it and read it. It also kind of looks like it is stretched a little bit, the coils look kind of oblong. I will keep playing with it maybe I will stumble upon a solution.

Thanks for the help!!
Brad

November 2nd, 2006, 07:07 AM	#1
blawrenz Member Join Date: Jul 2006 Location: Kansas City Posts: 13	ProWORX 32 I am using ProWORX 32 version 2.0 for a project that I am working on. When I go to print my networks out from the report generator. I am unable to read the comments and addresses on the print-out. I have been able to get around this by right-clicking on the current network displayed and just printing individual networks but I have not been able to figure out how or if the font size can be changed on the comments and addresses. I have even tried exporting to a PDF and others with no success. Does anyone have any suggestions?? Thanks in advance. Brad

November 2nd, 2006, 11:20 AM	#2
Sliver Member Join Date: Feb 2004 Location: Kingston, Ontario Posts: 484	Brad, This may not be your issue, but check this thread for info on Proworx32 ver 2.0 reporting problems.It may get you going. By the way, how does the report look in the preview screen? Brian. __________________ People always fear change. People feared electricity when it was invented didn't they? People Feared coal, they feared gas-powered engines... There will always be ignorance, and ignorance leads to fear. But with time, people will come to accept their silicon masters. Bill Gates Last edited by Sliver; November 2nd, 2006 at 11:22 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
RSView 32	hhuong	LIVE PLC Questions And Answers	7	January 22nd, 2013 05:26 PM
ProWORX 32 project examples	fzhang	LIVE PLC Questions And Answers	1	January 14th, 2013 06:31 PM
Proworx Demo Vs. Full Version	CONTROLTESTGUY	LIVE PLC Questions And Answers	2	January 25th, 2006 01:45 PM
ModSoft Tags from ProWorx 32	mcrisenbery	LIVE PLC Questions And Answers	3	August 13th, 2005 08:41 PM
Team Leader has Proworx 32 ver 1.1 in desk, will not allow me to upgrade from Modsoft	Sliver	LIVE PLC Questions And Answers	0	April 8th, 2005 09:29 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

November 3rd, 2006, 06:46 AM	#3
blawrenz Member Join Date: Jul 2006 Location: Kansas City Posts: 13	Brian, I checked out that thread and tried the things that had been posted and was unable to get what I wanted. I am having the opposite problem that you had, the text is so small that you can't read it without a magnifying glass. So instead of changing from Large to Normal, I changed mine from Normal to Large and it basically looked about the same. As far as how that it looks on the preview screen, again it is very small you can zoom in on it and read it. It also kind of looks like it is stretched a little bit, the coils look kind of oblong. I will keep playing with it maybe I will stumble upon a solution. Thanks for the help!! Brad

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)