ge fanuc plc- serial to parallel conversion - PLCS.net

vishak · August 19th, 2007, 10:08 PM

Hi.I am new to the GE Fanuc plc. I was able to work out simple programming examples so that i get a hold over it.Now,i am doing a project where i need to convert serial data from the rs-232 or rs-485 port to parallel data(which occurs at the plc output).
Secondly,i also wanted to know if it is possible to continuously update serial data from the pc to the plc so that i receive parallel data simultaneously at the output. Please help me out.
Thanks in anticipation.

Steve Bailey · August 20th, 2007, 06:43 AM

Please describe in more detail what you want to do. I don't understand what you mean by "parallel data". Also, which model processor are you using?

vishak · August 20th, 2007, 09:22 AM

i m usin ic200ual006.
i have designed a relay circuit in which the input is in given thru a parallel port.
this is wht i want to do.. i mean data in the serial format is the input to the plc. the output is in the parallel form. i cud easily explain this usin the example..
input to plc is
1001.

the output i want is
1
0
0
1.

the baud rate is 100 hz.

i also want the output to be changed as and when i change the input(i mean feed a different binary number in the pc)

August 19th, 2007, 10:08 PM	#1
vishak Member Join Date: Aug 2007 Location: bangalore Posts: 2	ge fanuc plc- serial to parallel conversion Hi.I am new to the GE Fanuc plc. I was able to work out simple programming examples so that i get a hold over it.Now,i am doing a project where i need to convert serial data from the rs-232 or rs-485 port to parallel data(which occurs at the plc output). Secondly,i also wanted to know if it is possible to continuously update serial data from the pc to the plc so that i receive parallel data simultaneously at the output. Please help me out. Thanks in anticipation.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
GE Fanuc 90-30 PLC	Stixs	LIVE PLC Questions And Answers	10	April 21st, 2013 03:51 PM
GE Series 5 PLC Conversion	edwin	LIVE PLC Questions And Answers	0	March 21st, 2006 07:26 PM
Ge Fanuc Plc	sanket_shete	LIVE PLC Questions And Answers	15	August 24th, 2005 03:30 AM
GE fanuc PLC & Temprature controller	harshad	LIVE PLC Questions And Answers	1	July 1st, 2005 08:42 AM
Series one GE Fanuc plc	sandro.chiarle	LIVE PLC Questions And Answers	7	September 15th, 2002 05:25 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

August 20th, 2007, 06:43 AM	#2
Steve Bailey Lifetime Supporting Member + Moderator Join Date: Apr 2002 Location: The boondocks of Western Massachusetts USA Posts: 4,672	Please describe in more detail what you want to do. I don't understand what you mean by "parallel data". Also, which model processor are you using?

August 20th, 2007, 09:22 AM	#3
vishak Member Join Date: Aug 2007 Location: bangalore Posts: 2	i m usin ic200ual006. i have designed a relay circuit in which the input is in given thru a parallel port. this is wht i want to do.. i mean data in the serial format is the input to the plc. the output is in the parallel form. i cud easily explain this usin the example.. input to plc is 1001. the output i want is 1 0 0 1. the baud rate is 100 hz. i also want the output to be changed as and when i change the input(i mean feed a different binary number in the pc)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)