NovaTech D/3 Process Automation System ? - PLCS.net

cntrlfrk · August 24th, 2007, 09:18 AM

I was curious if anyone out there has any experience with the D/3 system? I really know very little about it. What type of programming language does it use? Is it considered a PLC type system or a DCS? Does anyone have any sample code I can take a look at?

jamesau · August 24th, 2007, 03:28 PM

I cut my teeth on the D/3 DCS many moons ago. It's been around for over 20 years and has changed ownership several times (Rexnord, TI, Banner,...).

Your best bet for info is to start here:
http://www.novatechweb.com/d3pas.html

davidg68124 · August 25th, 2007, 07:22 AM

One of my coworkers is a former Novatech programmer. He loved it. I will talk to him about where to find the best resources and post it here next week.

David

Sheldn · August 25th, 2007, 10:21 AM

D/3 was started many years ago by Texas Instruments (TI)Process Systems Division and sold in 1994 to GSE. There are still some systems out there. Programming from what a person showed me was similar to Pascal.

August 24th, 2007, 09:18 AM	#1
cntrlfrk Member Join Date: Feb 2006 Location: Nebraska Posts: 244	NovaTech D/3 Process Automation System ? I was curious if anyone out there has any experience with the D/3 system? I really know very little about it. What type of programming language does it use? Is it considered a PLC type system or a DCS? Does anyone have any sample code I can take a look at?

August 25th, 2007, 07:22 AM	#3
davidg68124 Member Join Date: Feb 2005 Location: Chattanooga, TN Posts: 313	One of my coworkers is a former Novatech programmer. He loved it. I will talk to him about where to find the best resources and post it here next week. David __________________ The PRICE of FREEDOM is not FREE! My son is now a United States Marine and I could not be more proud of what he and others will do to protect our freedoms here at home.

August 25th, 2007, 10:21 AM	#4
Sheldn Member Join Date: Nov 2005 Location: Wisconsin Posts: 144	D/3 was started many years ago by Texas Instruments (TI)Process Systems Division and sold in 1994 to GSE. There are still some systems out there. Programming from what a person showed me was similar to Pascal. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
RSLogix User Fault Routine	jthornton	LIVE PLC Questions And Answers	17	October 23rd, 2008 02:55 PM
Manual/Auto	jthornton	LIVE PLC Questions And Answers	9	October 5th, 2006 12:40 PM
Hydraulic Winch Control	shelnian	LIVE PLC Questions And Answers	10	May 3rd, 2006 09:51 AM
Dcs, Scada	hasnoclue	LIVE PLC Questions And Answers	15	April 11th, 2005 06:12 AM
how often should I trigger the PID?	Ron Beaufort	LIVE PLC Questions And Answers	11	February 22nd, 2003 10:57 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

August 24th, 2007, 03:28 PM	#2
jamesau Lifetime Supporting Member Join Date: Mar 2004 Posts: 110	I cut my teeth on the D/3 DCS many moons ago. It's been around for over 20 years and has changed ownership several times (Rexnord, TI, Banner,...). Your best bet for info is to start here: http://www.novatechweb.com/d3pas.html

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)