You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old November 15th, 2008, 05:39 PM   #1
geniusintraining
Lifetime Supporting Member + Moderator
United States

geniusintraining is offline
 
geniusintraining's Avatar
 
Join Date: Jun 2005
Location: SC
Posts: 3,771
1784-PCM5/B pinout? on the DB9, DH+

Hello everyone... I have lost my adapter/pig tail that I plug into the DB9 and now I can not find the pinout and have look...

I have a PCM5/B on the end it has the removable round end for the DH+, I made an adapter (short pig tail) that plug into the DB9 and had 3 wires hanging out (data+, data- and the shield) I would hard wire into the trunk line (or at the CPU) and get into all the nodes for this connection

Does anyone know the pin out of the DB9?
__________________
www.PLCCable.com Save 5% on all cables and trainers, enter coupon code PLCTalk at check out... see our NEW line of PLC programming cables, smaller, cheaper, better....
  Reply With Quote
Old November 15th, 2008, 05:59 PM   #2
Ken Roach
Lifetime Supporting Member + Moderator
United States

Ken Roach is offline
 
Ken Roach's Avatar
 
Join Date: Apr 2002
Location: Seattle, WA
Posts: 10,555
From the Knowledgebase, article ID # 19500:



1784-PCM5:(this is the DH+ connection, comes also with mini-din adapter)
9 Pin D-Sub connector:
Wire Color Pin Number
CLEAR PIN 1
BLUE PIN 5
DRAIN(UNINSULATED) PIN 7

That adapter is part number 1784-CP7; most distributors and A-B offices have several stashed in a drawer if you need one.




[img]file:///C:/DOCUME%7E1/kiroach/LOCALS%7E1/Temp/moz-screenshot-4.jpg[/img]
  Reply With Quote
Old November 15th, 2008, 06:03 PM   #3
geniusintraining
Lifetime Supporting Member + Moderator
United States

geniusintraining is offline
 
geniusintraining's Avatar
 
Join Date: Jun 2005
Location: SC
Posts: 3,771
Quote:
Originally Posted by Ken Roach

That adapter is part number 1784-CP7; most distributors and A-B offices have several stashed in a drawer if you need one.
I have the CP7 I just needed the drawing so I can hook up to my drop...

Thank you very much!

Mark
__________________
www.PLCCable.com Save 5% on all cables and trainers, enter coupon code PLCTalk at check out... see our NEW line of PLC programming cables, smaller, cheaper, better....
  Reply With Quote
Old November 15th, 2008, 10:37 PM   #4
Alan Case
Lifetime Supporting Member
Australia

Alan Case is offline
 
Alan Case's Avatar
 
Join Date: Apr 2002
Location: Wagga Wagga
Posts: 1,252
I would also be interested in the pinout of the DB-9.
I had the adaptor connected to the cable and it got bent in my bag and pulled the end out of the DB-9. I need to re-solder it on.
Regards Alan Case
  Reply With Quote
Old November 15th, 2008, 11:12 PM   #5
geniusintraining
Lifetime Supporting Member + Moderator
United States

geniusintraining is offline
 
geniusintraining's Avatar
 
Join Date: Jun 2005
Location: SC
Posts: 3,771
Hi Alan,

I used the pinout that Ken posted and it worked perfect...

But not sure of the other side of the DB9 (this is what I think you are talking about) I just needed the pin out after the DB9 to the DH+

How many wires? they are only using the 3 wires, pins 1,5 and 7
__________________
www.PLCCable.com Save 5% on all cables and trainers, enter coupon code PLCTalk at check out... see our NEW line of PLC programming cables, smaller, cheaper, better....
  Reply With Quote
Old November 15th, 2008, 11:25 PM   #6
Mickey
Lifetime Supporting Member
United States

Mickey is offline
 
Mickey's Avatar
 
Join Date: May 2003
Location: Palmdale,Ca
Posts: 8,356
Here's the whole thing,but the secret stuff is in the box in the middle.

__________________
Mickey

If you want happiness for an hour-take a nap. If you want happiness for a day-go fishing. If you want happiness for a month-getmarried. If you want happiness for a year-inherit a fortune. If you want happiness for a lifetime-help someone else.
----- Chinese Proverb
  Reply With Quote
Old May 7th, 2012, 05:14 PM   #7
shawnleegabriel
Member
United States

shawnleegabriel is offline
 
Join Date: May 2012
Location: Brush, Colorado
Posts: 1
I am looking for an RS232 to DH+ adapter.. Small

preferably something similar to 1761-NET-AIC

thanks
  Reply With Quote
Old May 7th, 2012, 05:42 PM   #8
Mickey
Lifetime Supporting Member
United States

Mickey is offline
 
Mickey's Avatar
 
Join Date: May 2003
Location: Palmdale,Ca
Posts: 8,356
Quote:
Originally Posted by shawnleegabriel View Post
I am looking for an RS232 to DH+ adapter.. Small

preferably something similar to 1761-NET-AIC

thanks
See links below, one is for a USB to DH+ the other two are RS232 to DH+.
But nothing similar to the AIC.

Make sure you are sitting down before looking at the prices.

http://samplecode.rockwellautomation...n045_-en-p.pdf

http://www.industrial-gateways.com/D...plus-or-DH-485

http://www.ebay.com/sch/i.html?_nkw=..._id=3617907036
__________________
Mickey

If you want happiness for an hour-take a nap. If you want happiness for a day-go fishing. If you want happiness for a month-getmarried. If you want happiness for a year-inherit a fortune. If you want happiness for a lifetime-help someone else.
----- Chinese Proverb
  Reply With Quote
Old May 7th, 2012, 09:04 PM   #9
geniusintraining
Lifetime Supporting Member + Moderator
United States

geniusintraining is offline
 
geniusintraining's Avatar
 
Join Date: Jun 2005
Location: SC
Posts: 3,771
I have them for cheap.... well second thought, less

http://www.ind-concepts.com/Allen_Br...PLC_Cables.htm
__________________
www.PLCCable.com Save 5% on all cables and trainers, enter coupon code PLCTalk at check out... see our NEW line of PLC programming cables, smaller, cheaper, better....
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
1784 PCMK series A Derick1 LIVE PLC Questions And Answers 5 April 14th, 2007 08:56 AM


All times are GMT -5. The time now is 11:29 PM.


.