Rslinx comminication error - PLCS.net

manasi · July 7th, 2009, 03:30 AM

Dear All
I am using licensed Rslinx classic gatway for one of my projects. HMI used is iFIx5.0 and its communication with PLC is through OPC.
While project is in run mode after every 15-20 minutes I am getting microsoft error. its screen shot is attached for reference.
Please suggest any solution to overcome this problem.
Is this operating system problem. OS is windows xp professional.

Regards
Manasi

Oakley · July 7th, 2009, 07:17 AM

What SP of XP Pro?
What is the version of RSLinx you are running?

manasi · July 7th, 2009, 07:51 AM

Quote:

Originally Posted by Oakley

What SP of XP Pro?
What is the version of RSLinx you are running?

Windows XP professional with SP-2
And Rslinx classic gateway 2.51

Mickey · July 7th, 2009, 08:06 AM

Are you running a multi-processor or multi-core computer?

See picture below Two RSLinx's ?

manasi · July 9th, 2009, 01:39 AM

I have seen time 2 icons of Rslinx as you have shown in picture.
Please see the file attached for Processor details. Its DUAL CPU.
Can you suggest any solution? Can you suggest a system configuration for a workstation for iFix 5.0

Manasi

manasi · July 9th, 2009, 03:10 AM

Quote:

Originally Posted by manasi

I have seen time 2 icons of Rslinx as you have shown in picture.
Please see the file attached for Processor details. Its DUAL CPU.
Can you suggest any solution? Can you suggest a system configuration for a workstation for iFix 5.0

Manasi

Processor details: Intel(R) Pentium(R) dual CPU @ 2.2GHz and 1GB RAM
OS: windows xp professional version 2002

-Manasi

BryanR · July 9th, 2009, 06:35 AM

Quote:

Originally Posted by Mickey

Are you running a multi-processor or multi-core computer?

See picture below Two RSLinx's ?

That's a windows thing. Whenever a program that creates an icon in the task bar crashes, the icon stays there until you mouse over it. When you mouse over, any icon that is un-attached to a running application vanishes.

Mickey · July 9th, 2009, 07:57 AM

Quote:

Originally Posted by BryanR

That's a windows thing. Whenever a program that creates an icon in the task bar crashes, the icon stays there until you mouse over it. When you mouse over, any icon that is un-attached to a running application vanishes.

HMMMM? I didn't know that. Thanks

Mickey · July 9th, 2009, 08:00 AM

Quote:

Originally Posted by manasi

I have seen time 2 icons of Rslinx as you have shown in picture.
Please see the file attached for Processor details. Its DUAL CPU.
Can you suggest any solution? Can you suggest a system configuration for a workstation for iFix 5.0

Manasi

http://rockwellautomation.custhelp.c...hhNGM%2A&p_li=

marshjhm · July 9th, 2009, 05:47 PM

The patch suggested by Mickey will probably work, but you might consider upgrading your version of RSlinx to the current one: 2.54.00.11. The 2.5x versions before this release had issues.

manasi · July 9th, 2009, 10:53 PM

thanks......

-manasi

Dua Anjing · July 9th, 2009, 11:14 PM

Quote:

Originally Posted by BryanR

That's a windows thing. Whenever a program that creates an icon in the task bar crashes, the icon stays there until you mouse over it. When you mouse over, any icon that is un-attached to a running application vanishes.

That's a big thanks from me too ! I've been chasing and issues here where sometimes it seems that I have two instances of kepware running. Now at least I know why , now all I have to do is to find out what is causing kepware to crash..

manasi · July 10th, 2009, 06:53 AM

Quote:

Originally Posted by marshjhm

The patch suggested by Mickey will probably work, but you might consider upgrading your version of RSlinx to the current one: 2.54.00.11. The 2.5x versions before this release had issues.

I have also tried with Rslinx 2.54 version. but stiall microsoft error occurs. Pl suggest me some solution....or it is advisable that " not to use multicore processor"
-Manasi

July 7th, 2009, 07:17 AM	#2
Oakley Member Join Date: Oct 2004 Posts: 1,047	What SP of XP Pro? What is the version of RSLinx you are running? __________________ Artificial intelligence never overcomes natural stupidity.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
1747-PIC RSLinx error message	thekoolguy	LIVE PLC Questions And Answers	19	February 19th, 2009 01:53 PM
RSlinx 2.53 with Vista support available	Contr_Conn	LIVE PLC Questions And Answers	7	September 4th, 2008 07:56 AM
RSLinx problem registering definitions from PIUNSOL.INI	Koos	LIVE PLC Questions And Answers	0	January 13th, 2008 10:23 PM
MPI comunication	Manuel Raposo	LIVE PLC Questions And Answers	22	July 16th, 2007 06:24 AM
RSLinx 2.43 install error 1722	Contr_Conn	LIVE PLC Questions And Answers	6	September 1st, 2005 12:50 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

July 9th, 2009, 01:39 AM	#5
manasi Member Join Date: May 2007 Location: maharashtra Posts: 93	I have seen time 2 icons of Rslinx as you have shown in picture. Please see the file attached for Processor details. Its DUAL CPU. Can you suggest any solution? Can you suggest a system configuration for a workstation for iFix 5.0 Manasi

July 9th, 2009, 05:47 PM	#10
marshjhm Member Join Date: Oct 2006 Location: Spokane, WA Posts: 33	The patch suggested by Mickey will probably work, but you might consider upgrading your version of RSlinx to the current one: 2.54.00.11. The 2.5x versions before this release had issues.

July 9th, 2009, 10:53 PM	#11
manasi Member Join Date: May 2007 Location: maharashtra Posts: 93	thanks...... -manasi

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)