Siemens ASi redundancy

sstacko1

Member
Join Date
Aug 2008
Location
Ireland
Posts
1
hey guys, I am setting up a siemens s7-300 plc with an ASi network. I am wondering, what is the best way to achieve dual redundancy of the ASi interface module?
 

Similar Topics

Hi all I have a machine with loads of asi safety switches on and I/O I was looking at the OEM Program and I’m thinking that the asi safe is an...
Replies
1
Views
1,343
Hi all , We have a trouble in CP 343-2 Asi master module having issue . When we replace new module we followed the procedure like below. But...
Replies
3
Views
2,066
Hi, I have a customer who would like to add four of our analogue load cells (0-50mV output range) to their ASI network. The customer I don't...
Replies
2
Views
1,595
Hello. I have a problem with siemens asi , first time with siemens asi but not the first time with asi. I have an Dp/asi F-link and a...
Replies
0
Views
2,028
I have a Siemens CP2433 ASI Master module that is acting strange... The module normally scans 30 slaves, and each slave appears to scan without...
Replies
4
Views
3,606
Back
Top Bottom