Control Techniques Mentor MP Over Profibus DP

[recycled_mind]

Hello experts,

I have a project for controlling the speed of a 220V DC Motor (1.5kW).
My main controller is CPU315-2DP. I'm using control techniques Mentor MP DC Drive over Profibus DP. Can anyone help me build a block for the DC Drive? I need to control and monitor the DC Drive over profibus.

Anybody preferably from the Philippines if you are interested to help me of course for a fee. Just contact me.


Thanks,
Alex

[bkottaras]

Originally Posted by recycled_mind

Hello experts,

I have a project for controlling the speed of a 220V DC Motor (1.5kW).
My main controller is CPU315-2DP. I'm using control techniques Mentor MP DC Drive over Profibus DP. Can anyone help me build a block for the DC Drive? I need to control and monitor the DC Drive over profibus.

Anybody preferably from the Philippines if you are interested to help me of course for a fee. Just contact me.


Thanks,
Alex

I never had to setup Profi for a Mentor DC drive but the link below may be a good starting point.
Scroll down a bit and you'll find some application notes on Profibus DP.
I believe they are used for the Unidrive series but it'll be something you can adopt and with minor changes build your block for the Mentor.
Hope this helps.
http://www.emersonct.com/support/tec...nications.aspx